How Do I Become a Lift Mechanic?

Car lift refers to the auto maintenance equipment used in car maintenance industry for car lift. Lifts play a vital role in car maintenance. No matter whether the vehicle is overhauled or repaired, it cannot be separated from it. The nature and quality of its products directly affect the personal safety of maintenance personnel. Among the various maintenance and repair enterprises, whether it is a comprehensive repair shop that repairs multiple vehicle models, or a street-side shop with a single business scope (such as a tire shop), almost all are equipped with lifts.

Lift

Since the 1990s, domestic lifts have gradually begun to spread. With the increase in the number of cars in China, the demand for lifts as an important tool for car maintenance has also increased. Now the lift market has nearly a hundred Chinese and foreign brands, with hundreds of thousands of product lines. Foreign brands have higher prices, but relying on their good product quality, stable performance, and simple equipment operation, they have established a good reputation among dealers. With the development of the domestic lift industry in recent years, many improvements have been made in product design, technology development, and after-sales service, and sales have also greatly increased.
JT / T 155-2004; Implementation date: 20040715
The lifts are divided according to function and shape: single post, double post, four post, scissor.
According to the function, it can be divided into four-wheel positioning type and flat type;
According to the space occupied, it can be divided into above ground type and underground type;
The floor lift does not need to dig grooves, and is suitable for any repair shop. Some floors are not suitable for installing two-post lifts and ordinary four-post lifts, and the machine has a wide contact surface with the floor. Above the floor to solve the customer's venue problem. The biggest advantage of scissor lifts over two-post and four-post lifts is that they do not take up space and are easy to use. The disadvantages are that the charge balance is very strict, and it needs to be equipped with a control box, which is more expensive.
1. When the lift rises to the maximum lifting height, the limit switch will automatically power off and automatically cut off the hydraulic circuit in the hydraulic pump;
Installation description of two-column gantry lift 1: Place the main and auxiliary columns on the ground side by side, and install the beam, pay attention to tighten all screws 2: Wear the steel wire rope, tubing, limit line on the beam, so After the column is erected, do not climb to the upper area of the beam to install things. 3: On the side with 3 people, erect the column and adjust the position. 4: Measure with a spirit level and adjust the two columns not to tilt or twist. Then use a horizontal pipe to measure whether the column is on a horizontal surface. If it is not possible, add a pad to flatten it. 5: After making sure that the column is not inclined, fix the expansion screw.
6: The oil pump is connected, and the Great Wall 46 hydraulic oil is added.
7: Make sure that the oil cylinder chain and wire rope are connected correctly. Jog and lift to make sure the voltage is positive and negative.
8: Lift a car, lift about 0.6 meters high, lock in the insurance position 9: Tighten the two steel ropes
The eighth and ninth items are the same in any two-column lift, and this adjustment must be repeated after the rope is loose after using the lift for a period of time.
Two-pillar ordinary lift installation brief description 1: Put the main and auxiliary columns upright (this is different from the gantry, the gantry is flat on the ground and wear steel wire rope), wear the steel wire rope, tubing 2: place the floor 3: use the level Measure with a ruler and adjust the two columns so that they do not tilt or twist. Then use a horizontal pipe to measure whether the column is on a horizontal surface. If it is not possible, add a pad to flatten it. 4: After making sure that the column is not inclined, fix the expansion screw.
5: The oil pump is connected, and the Great Wall 46 hydraulic oil is added.
6: Make sure that the oil cylinder chain and wire rope connection are in place. Jog and lift it to make sure that the voltage is positive and negative.
7: Lift a car, lift about 0.6 meters high, lock in the insurance position 8: Tighten the two steel ropes to the same
Four-post lift installation
1: Determine the installation place, the two flat beams should be flat with a height of about 0.5 meters 2: The two flat plates are placed on the beam and fixed 3: Put the four columns in place 4: Wear the wire rope 5: The columns and the block Leave a distance of 10mm. 6: Make a main column expansion screw 7: Lift the lifter and adjust the gap 8: All the expansion screws 9: Measure with a spirit level and adjust the four columns to not tilt or twist. Then use a horizontal tube to measure whether the plate is on a horizontal surface, and adjust if it is not possible
1. Before use, remove the appliances and sundries near the lift that hinder operation, and check whether the operating handle is normal.
Second, the operating mechanism is sensitive and effective, and the hydraulic system does not allow crawling.
3. When supporting a vehicle, the four supporting angles should be on the same plane. Adjust the height of the supporting angle rubber pad to contact the supporting part of the vehicle chassis.
4. When supporting a vehicle, the vehicle must not be too high. The four brackets must be locked after being supported.
5. After the lifted vehicle is driven in, the lift support block should be adjusted to align with the lift point specified for the model.
6. When lifting, the personnel should leave the vehicle. When lifting to the required height, the safety lock pin must be inserted, and the safety and reliability must be ensured before the vehicle bottom operation can be started.
7. Except for the subsistence allowances and minor repairs, other cumbersome and heavy operations shall not be performed on the lift.
8. Lifters must not rise and fall frequently.
Nine, the lifting of the vehicle should be stable, and the landing should be slow.
10. It is strictly forbidden to lift the hoist when someone is working.
11. It is found that the operating mechanism is not working, the motor is not synchronized, the bracket is uneven, or the hydraulic part is leaking oil. It should be repaired in time, and it should not be operated with illness.
12. After the operation, the sundries should be removed, and the area around the lift should be cleaned to keep the site clean.
13. Regularly (half a year) remove the accumulated water in the oil cylinder of the lift and check the oil quantity. If the oil quantity is insufficient, fill in the same brand of pressure oil in time. At the same time, check the lubrication and the gears and seams of the elevator.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?