What does the operator do on board?

The shovel operator is a person who is trained to use a piece of heavy building equipment called Mother. Most of the tasks of the operator at the contradictory are to dig holes and trenches or smoothing dirt so that the surface of the surface is at the level. Most people who are trained to use an excavator are also trained to use other pieces of equipment such as bulldozers, shoulder blades or front-end loaders. In addition to manipulating the arm and the shovel on the part, the operator must also be able to drive the machine around the construction site.

The most common task for the operator is digging them and moving around the place. These machines are relatively strong and can be used for spices for many different materials, including dirt, rocks, gravel and mud. Once the shovel has a lot of material, the hydraulic arm can throw the materials on the tipper or another part of the workplace. Shovel and arms are also connected to the body of the excavator, so the heater can drive the materials to another partthe site. The operator must be able to drive the machine, correctly place the hydraulic arm and use the shovel properly.

In addition to digging the holes and removing the Earth, the operator can kick the trenches. The shovel is able to move in a straight line, making it easier to dig trenches for cables or pipes. Once in place, the blade may also be to fill the ditch. The trenches can be dug on the ground or underwater, although soles that are used in shallow water are usually connected to specialized ships.

The bum operator can use the shovel on the shovel for flattening or alignment. This is sometimes necessary to ensure that the country is stable and ready for other aspects of construction. The machine is used to compress the ground so that the site has a level. In many cases amattahoe will be used to dig in one area and either fill it later or move this materialto another part of the construction site.