What is the corrosion technician doing?
Corrosive technician controls, repairs structural integrity of metal pipeline. Metal pipes are used in numerous water and gas transport applications. The technician must ensure that the connection and construction of the pipe wall observes specific specifications for the health and safety of the surrounding communities. The corrosion technician normally oversees the cathodic protection system connected to the pipeline. This system operates a direct electrical current along the pipe structure to change the magnetic polarity of the metal. In response to the change of polarity, the metal is less susceptible to corrosion and damage.
The technician must consistently follow all parts of the pipe. Many corrosion technicians must move around the workplace in the vehicle to achieve all parts of the pipeline. Some technicians need access to pipes underground and require employees to climb ladders and work in enclosed areas. More jobs may require corrosion technician, which requires a lot of time to travel during the working day. The technician will be recorded and analyzedSurveys of soil and surrounding land. This individual can also cooperate with other qualified corrosion workers to cooperate on the best future location of the pipeline construction.
The four -year university degree is usually not required for a corrosion technician, but must be licensed by the National Association of Corrosive Engineers (NACE). Many employers also insist that a technician has 2 to 5 years of corrosion control.
pipe violations can occur at any time. Corrosion technician is expected to work on weekends and holidays of corrosion control fails. The employee must be flexible with his time to meet the needs of the employer, especially if it is a combustible gas.
A successful corrosion technician documents problems with the most details. Defects of corrosion repairs can be resolved faster - with a lower device time - with the proper documentation of the solution process. FutureAvam can be prevented from preventive maintenance managed by a technician based on past documented problems.
The technique position is mainly mechanical and hands on a working role, but the worker must also be able to work with computers. The information collected from documented corrections must be entered into a computer for future analysis and improvement. The ability to manipulate tables and other software is highly beneficial for corrosion technicians.