What Does a Lathe Machine Operator Do?

A lathe can also be interpreted as a lathe operator. Turner's workpiece position refers to the installation of the site, machine tools, and auxiliary equipment fixtures they use. The arrangement of work positions not only affects the level of productivity, but also has a great relationship to physical exertion.

turner

(Lathe operator)

As a lathe operator, you must have the following basic knowledge:

1. Carefully study and understand the parts, components, mechanisms of various lathes and their interrelationships. For proper use of the lathe and troubleshooting. And familiar with the refueling holes of the lathe.

2. Use the accessories and tools of the lathe correctly,

The workpiece position is: lathe,

I. Before starting work: You must do the following:

1. Whether the appearance of the lathe equipment mechanism is intact. (Shift lever, protective equipment)

If there is no abnormality: drive at low speed for 1-2 minutes. See if it works. It is even more important in winter. If there is a fault, notify the leadership and maintenance application.

2. Check all lubrication holes and lubricate.

3. Familiarize yourself with drawings and processes and place them in a convenient location. Don't get dirty. If you find that there are problems with the drawings and workmanship, report it to the relevant personnel and you cannot change it yourself.

4. Inspection tools,

Generally must do: (enter the work site)

1. Work is to wear tight overalls or tights.

2. The lathe wore a work cap, and lesbian hair was braided in the cap.

3. When working, the head should not be too close to the chuck and the workpiece. Prevent cutting from flying into the eyes. If swarf splashes, you must wear goggles.

4. Keep hands and body away from rotating parts. Not to be joked in these places.

5. The workpiece and turning tool must be clamped firmly, otherwise, flying out may cause injury.

6. When the work piece and the chuck are too heavy to remove, don't be alone, you should ask someone else for help.

7. Do not measure the workpiece while the lathe is turning. Cannot be used

There are five levels in this profession: Elementary (

Elementary (one of the following conditions)

(1) After the primary formal training of this occupation has reached the required standard hours, and obtained a certificate of completion (completion)

(2) Work in this profession for more than 2 years.

(3) The vocational apprenticeship expires.

Intermediate (one of the following conditions)

(1) obtained the junior

Approved by the Ministry of Labor and Social Security

Divided into theoretical knowledge examination and skill operation assessment. Theoretical knowledge test uses a closed-book written test method, and the skill operation test uses an on-site practical operation method. Both the theoretical knowledge test and the skill operation assessment are implemented on a 100-point scale, and those with a score of 60 or more are considered qualified. The assessment of technicians and senior technicians must also be comprehensively evaluated.