What Does an Electrical Project Engineer Do?

Power professional engineering engaged in surveying, planning, design, power engineering construction, installation, commissioning, technology development, experimental research, power generation operation, maintenance, repair, power grid dispatching, power management, power environmental protection, power automation, technical management Technical staff.

Electrical Engineer

concept

Electricity, one of the branches of physics. It mainly studies the formation and application of "electricity". The word "electricity" in the West is derived from the Greek word for amber, but in China it

1. Draw, review, check and keep electrical engineering drawings;

1. Citizens of the People's Republic of China, who abide by national laws and regulations, abide by professional ethics, and have corresponding professional education and professional practice conditions, can apply to participate

   1. Participate in the verification of the preliminary design of the project and the review of the construction drawings, mainly to check whether the electrical design meets the requirements of the project and whether the electrical design is reasonable.

   2. Participate in the review of the construction organization design and construction plan of the construction unit, and mainly review the technical quality and construction strength of the construction unit's construction personnel to meet the technical and schedule requirements of the project.

   3. Grasp quality and project progress during construction.

   A. Manage the quality of construction materials well, do not meet the design and inferior products, we must resolutely put an end to them.

   B. Electrical pipe laying should focus on checking the bending radius of the pipe and whether the nozzle enters the box to ensure smooth threading and changing.

   C. Wire and network insulation must meet specifications.

   D. When the grounding lightning protection device is installed, the overlap of the down-conductor and the ground wire must meet the specifications, and the grounding resistance must meet the design requirements.

   E. Do well inspection and certification of concealed projects.

   F. Cooperate with relevant professional engineers.

   G. Do a good job of on-site visa work.

   H. Grasp the progress of electrical construction.

   4. Do a good job of acceptance inspection

   A. Be sure to check and accept according to drawings and specifications to ensure project quality.

   B. The electrical device must meet the design requirements.

   C, do a good job of after-sales service, and seriously and promptly solve problems raised by customers.

   D. Do well inspection and certification of concealed projects.

   E. Cooperate with relevant professional engineers.

   F. Do a good job of on-site visa work.

   5, do a good job of after-sales service, and seriously and promptly solve problems raised by customers.

   If the self-study exam is to cross the river, then a good self-study method is boat and bridge. With a good attitude, a strong interest, and referring to your own practice, the self-study exam is bound to succeed.
   Digest learning method < br In the process of self-study, summarizing while learning is a good way to improve learning efficiency. When doing simultaneous practice and self-test questions, it is very important to proofread and correct the usual summary. It helps to deepen knowledge.
   Logical classification method < br Self-examination review stage can properly break the restrictions of textbook chapters, and according to the logical structure of the book, compile a relatively concise logical relationship diagram, which is a good review method for systematizing knowledge.
   Question expansion method < br Many single-choice questions for reviewing reference books, the number is relatively large, and the coverage is also large. Therefore, when doing a multiple choice question, we must comprehensively consider the knowledge points, interrelationships and possible variations contained in the question, which will help to complete the review quickly.
   The method of arguing and asking questions <br /> The spark of truth will be more shining in the collision; the proper argument will be deepened in memory. May wish to argue and ask questions among students.
   Repeat learning method < br When you feel that you have mastered the knowledge, repeat it. This time I may get a deeper impression and more experience.
   Transpositional thinking < br In self-study, don't always think of yourself as a "student" and be in a passive position; instead, constantly put yourself in the position of "sir" and take the initiative to make a difference Ideas come.
   Role change method < br When self-study a certain specialty, such as accounting, don't just consider yourself as a candidate exercise question, but think of yourself as a senior designer who is doing power design for the design unit. In this way, they will apply what they have learned to the test.
   Cross-application method < br The cross-application of knowledge, multi-faceted and multi-disciplinary, will stimulate the study of this course to have a greater effect. This is an endless list of successful methods in the history of science.
   Classical guidance methods < br In self-study, I often encounter confusion. This requires the use of theoretical knowledge of classic disciplines, such as Marxist dialectical materialism, logic, and psychology, to guide practice.
   Focus on the law <br /> Good self-study candidates never make random guesses. However, it is feasible to focus on the test points before the test. Just three or five days before the exam, focus on the key points and difficulties of the subject. If there is too much content and you can't remember, you can choose "top priority", and if you write it down, you will gain something.

   With the rapid development of electrical intelligent technology, the status and role of electrical engineering becomes more and more important, which is directly related to the quality, construction period, investment and expected results of the entire project.

   Electrical engineers should have a high sense of responsibility for the quality of electrical engineering they are responsible for, and fully apply their professional level to thoroughly and meticulously manage the electrical engineering technology, quality, schedule, visa, safety and other management tasks.

   Electrical engineers must first have comprehensive professional knowledge. The construction of construction projects includes civil works, decoration, water supply and drainage, HVAC, electrical installation, etc. In construction, if only one major or only the progress of the profession is considered in one profession, it will inevitably affect the construction of other professions, and at the same time, the specialty is difficult to do well. During the foundation construction phase,

   "Electrical Engineer's Manual" is a comprehensive electrical technology reference book, which is divided into 5 parts, including 28 parts in electrical engineering basics, electrical equipment and materials, power system, electrical energy application, electrical control and automation. This book comprehensively and systematically introduces the most basic, most commonly used and latest technical content of each major in electrical engineering, which is both theoretical and practical.

   The book was co-organized by the China Electrotechnical Society and China Electric Power Press, and edited by Zhou Heliang, Honorary Chairman of the China Electrotechnical Society. The author brings together Tsinghua University, Zhejiang University, Shanghai Jiaotong University, Huazhong University of Science and Technology, Xi'an Jiaotong University, and Harbin The well-known professors and experts of scientific research institutes of the six universities of the University of Technology represent the highest level in the field of electrical engineering in China.

   Electrical engineers often have to operate electrical equipment in person, so those who hold a professional qualification certificate for electrical engineers will have a great competitive advantage and a wide range of employment options. Electrical engineers generally have the following three development paths:

   Path 1: Can work in production-type enterprises, the development path is junior electrical engineer-intermediate electrical engineer-senior electrical engineer;

   Path 2: Entering the Power Design Institute, Power Plant, and Power Bureau to engage in power system design and equipment management, etc. This path has good development prospects;

   Path three: After accumulating experience and cultivating the leadership of relevant organizations, it can develop into management talents, such as project managers.