How Do I Save Money On Heating?
Centralized heating refers to a form of centralized group heating. It is generally charged per square meter (building area) during a heating season. For the northern region, the weather is cold and requires long heating time. Central heating should be used to save money.
centralized heating
- Centralized heating refers to a form of centralized group heating. It is generally charged per square meter (building area) during a heating season. For the northern region, the weather is cold and requires long heating time. Central heating should be used to save money.
- In terms of energy utilization, centralized heating has a large one-time investment and high operating costs. Regardless of whether it is needed, the heating is always provided throughout the day. Due to different floors, the temperature is not uniform. If the heating is too hot, residents only have to open windows to cool down. Waste precious energy.
- Central heating has a power pump in the system heating, which is a very small
- Centralized heating is environmentally friendly and safe. There are two main types of residential heating systems, centralized heating systems and individual heating systems. Centralized heating is a centralized heat source that transfers heat to users through pipes. Concentration of the Beijing market
- Central heating mainly uses the form of floor heating,
- In terms of energy utilization, centralized heating has a large one-time investment and high operating costs. Regardless of whether it is needed, the heating is always provided throughout the day. Due to different floors, the temperature is not uniform. If the heating is too hot, residents only have to open windows to cool down. Waste precious energy. Meanwhile, set
- European countries have previously adopted centralized heating and area-based billing, but since the 1970s, with the development of energy-saving campaigns, the heating system has been reformed, and most of them have implemented centralized heating and household metering. Take Germany as an example. After the energy saving campaign started, the government successively promulgated
- Due to the small cross-section of the plate heat exchanger and the low degree of turbulence in the central heating system, the problems of fouling and blockage are easy to occur. It is the main problem of the central heating system in recent years. The main reasons are: 1. The circulating water is blocked by heat and scaling; 2. The impurities enter the pipe network to cause blockage; 3. The inner wall of the pipeline is rusted to form rust mud and cause blockage. The main hazards caused are: 1. Significant increase in energy consumption, increased operating costs, 2. Decreased system working efficiency, affected heating efficiency, and shortened equipment life. [1]
- For heating systems, the fouling of heat exchanger plates and the adhesion of microbial slime are the main factors affecting its normal operation. It has a great impact on the safety, normal and low-cost operation of the heating system, so it is necessary to periodically change the plate type. The heater can be cleaned by safe and effective cleaning to achieve the following purposes: thoroughly remove various scales, microbial slime and corrosion products in the circulating water system, ensure the safe and normal operation of the system, and higher heating efficiency; reduce operating costs, Significant energy savings. After cleaning, the power consumption or heat consumption of the system can be reduced by about 20% to 30%; while the hidden danger of corrosion is eliminated, the heat exchanger plates are protected, and the service life of the heat exchanger and piping equipment is prolonged.
- For a long time, plate heat exchangers in central heating systems have used chemical pickling, which includes organic acids and inorganic acids (mainly organic acids: oxalic acid, formic acid, etc. Inorganic acids: hydrochloric acid, nitric acid, etc.). These chemical cleaning methods cause serious damage to the equipment itself as well as the human body and the environment while failing to effectively solve the problem. Based on the concept of reducing energy consumption and protecting the environment, plate heat exchangers can be cleaned with high-efficiency and environmentally friendly cleaning agents. There are currently many Fustek series in China. Compared with traditional pickling, it has the characteristics of no corrosion and no pollution, and has played an important role in cleaning the plate heat exchanger in the central heating system.