What Is a Suction Tube?

Straw, English straw, or drinking straw, is a cylindrical, hollow plastic product whose main function is to drink beverages in cups, and also to suck the bone marrow of some cooked animal long bones.

[x gun]

The first is to "see", to see if there is no QS on the outside of the straw; whether the straw has a color, if there is a color, the safety of the straw will be reduced, and the darker one should be paid special attention; whether there are black spots in the straw Impurities or broken bubbles, as these are the characteristics of nonconforming products. Secondly, you need to "smell" and smell the pungent odor before touching the straw. Third, you need to squeeze it. If you squeeze the straw, it will be flat and not elastic, it means that the straw is made of a relatively thin material, the quality is poor, and it will be easily squashed during use.

Straw materials and tools

1. Material: various plastic straws, wooden sticks or bamboo sticks, red, green, black and white paint, white latex.

2. Tools: knife, scissors, lighter or candle.

Straw production process

1. Cut the selected straw with scissors according to the length you need.

2. Use a small knife to cut a small wooden stick or small bamboo stick into a 30 cm long stick, and then cut the 114 part into a cylindrical shape slightly smaller than the inner diameter of the straw, and cut the 314 part into a conical shape.

3. Coat the cylindrical end with white latex (can also be replaced by paint), insert a straw, and form a floating foot (if you can master the heat and kneading skills, you can directly soften the straw with a fire and soften it into a floating foot. , No longer bother to use the first and second procedures).

4. Soften the other end of the straw with a fire roast and squeeze it tightly to make it stick, completely closed, not seep into water, and form a floating head.

5. Use different colors of paint to paint the bleaching head on alternate colors to form bleaching eyes.

In this way, after the paint and glue are dried, it can be used. The above steps seem more complicated, but the operation is very simple. Several can be made at the same time, even dozens. Although the float made with straw is slightly rough and has a single shape, it is relatively resistant to bending and compression. Although you can not save much money or use a lot of straws to make your own floats, doing it yourself will not only bring fun to the production, but more importantly, from the aspect of fishing, practice environmental protection and build a harmonious society. "Everyone picks up firewood and has a high flame." As long as everyone starts, there will be more things available and less pollution.