How do I replace the network card?
steps to replace the network card may vary depending on the network card manufacturer and whenever possible, specific instructions provided by the card manufacturer should be observed. In general, however, replacing a network card usually includes uninstalling software that supports an existing card, then physically withdrawal of the card, installing new software for a substitute card, and then installing a network card on a computer tower or case. If you are trying to replace the network card in exchange exactly the same card, you do not need to uninstall and reinstall the software that accompanies this card. You should also consider whether you want to use an external or internal network card. External cards may be much easier to install and use, even if they may not be so relaxing and require external connections. If you want to replace a network card inside your computer, you will need to find a card that will work with your computer and OS and that can use the port you have on your computer for free.
Regardless of whether you are trying to replace a network card inside or outside your computer, you will probably need to uninstall the software for an old network card first. If you replace the card with exactly the same card, you do not have to do it, because the software should simply recognize the new card as easily as old. However, provided you are trying to replace the network card with another card, then, when you uninstall the software, you should turn off your computer. You can then physically remove the network card from the computer, either by disconnecting an external card or by removing an internal card from the motherboard and the computer Puter.
As soon as you remove the old network card, you can turn on the computer and wait for the boot to complete. Then you should install the software for your new network card and will probably invite you to turn off your computer at some point and install a new card. If it does not require you, then simply wait for the soft installationWARU finishes and then close the computer. You can then install a new network card either by connecting to the motherboard or simply by connecting an external device to your computer.
6 Launch your backup computer or wait for a new external device to recognize, and the software you installed should complete the installation and help you set up a new network card. This will usually include a connection to a local network or internet, and onlping you are dealing with any solutions to the problems with which you try to replace the network card.