What is a dynamic cache?
Cache is a section in memory of the central computer processing (CPU) that automatically holds previously displayed data without user input or preference. The dynamic cache contains data, but what is held is determined by the user's instructions, allowing the user to take control of the dynamic cache system. This prevents excessive use of the cache and only important functions are held. For dynamic systems, the user can usually increase or reduce the cache size. One problem with incorrectly configured cache is that if the cache is set too low, it can throw away important data.
The cache is made as a network for data capture. When the user approaches the site, launches the program, or does anything else, it takes a note and saves it in temporary memory. If the user approaches the site or program before leaving the cache, it loads much faster because the computer has fresh information. The problem with the cache is that it can be ryedBread to fill in features that are not important to users or occasionally used.
Many systems have an automatic cache that is set too high - higher than memory with random access (RAM) - which can cause frequent problems. When the cache is set to RAM, newer processes are difficult for the system to load or calculate. Performance suffers very much because the cache does not want to give up data, but wants to open a memory to allow new data to load.
Dynamic cache is one of the possible solutions to this problem. On the one hand, the user is able to select several programs or functions and set them to a dynamic cache. For example, if a user sets a web browser as a priority, his data will be stored without delay in the cache, while the lower priority function will not be stored in the cache or will be thrown if necessary.
Another solution is that the user can set upIT size cache on Dynamic cache. This allows the cache to be set to its absolute necessity and can be dynamically changed for what the user needs. When it's done, the cache can't take RAM.
The problem with setting a dynamic cache is that the user can set too low. In this case, when the cache is filled, but the user loads new data for a high priority function, fooled. It can throw away important data cache data that will stick to new data or can refuse to store new information. If this happens, the cache must be set to a higher threshold.