What is the PLCC socket?
Most of the bases on the motherboard are made to connect the central processing unit (CPU) with the computer, but the plastic lead carrier (PLCC) can work with the CPU or a number of other computer chips. The PLCC socket is commonly used when it can be heat and users who regularly replace chips. On the PLCC socket there are several types of connecting-rounds, wires and through the hands-which allow you to place many different chips in the socket. All PLCC sockets are four -sided, either square or rectangular and have a pitch of 0.05 inches (1.27 mm).
While there are many types of PLCC plCC units that are produced for different chips, all of them monitor certain design characteristics. The shape of each PLCC connector is either square or rectangle, because all chips that would join this connector are one of these two shapes. The spacing between wires and pins is always 0.05 inches (1.27 mm), not only as standardized design, but also Becase that the chips have the sameNou size of the gap.
Three types of connector units on the PLCC socket are pins, wires and holy. The pins and lines are standard on all PLCC connectors, but only some have through the hols. The pins are on the bottom, while the wires are teeth along the connector walls and are used for most chips. Through the HOLs there are holes at the bottom of the socket that allow wiring and also have a stronger bond than just pins connected to the motherboard.
One of the main reasons for using the PLCC socket instead of a conventional solder drawer is that the PLCC variety generates less heat for the motherboard. This allows you to add complex chips to the motherboard without having to take care of further heat. The copper from which most PLCC connectors are made help to transfer heat from the motherboard.
Another reason for PLCCSocket is that it allows users to replace the chips in and out of the socket. This andPlication is used by people who hack computers - more in terms of adding other functions rather than using malicious code - because you can add new chips that have not been created for the computer. Removing the chip from the PLCC connector can be difficult, so the PLCC extractors are usually used to remove the chip.