What is a fans of a socket 478?

socket fan 478 is a part that is located on the processor or central processing unit (CPU), which is mounted on the 478 socket. Also known as Socket N, Socket 478 is a device that Intel® Corporation semiconductor manufacturer debuts in 2000 for computer chips. Mother for data transmission for manunca computers. The Socket 478 fan is thus named because it is designed as a fan; In fact, it is better known as Heathink because technically acts as part of a larger unit. Another more accurate term is "colder", although it is used much less often than "heatsink".

The socket itself is designed to allow the fan to be installed. The Socket 478 uses a form factor known as the Flip-Chip Pin (FCPGA) grid field. This includes a CPU to die - where there is a place where its processing unit or core is located to turn around to reveal their backs. This areaT is the hottest part of the processor. Therefore, when it is placed on the socket 478, the heat is taken from the CPU. This then cools the computer chip and in fact prevents overheating and subsequent failure of the computer system.

Soket 478 Fans are usually made of black plastic, often have a copper core and are usually mounted on a block of aluminum. The entire unit has a three -wheel connector for the user to connect it to the motherboard. Although Intel® has created the Socket 478, the Socket 478 fans are now produced by a number of computers worldwide manufacturers. It is also important to note that Intel® has replaced the Socket 478 with the new LGA 775 socket, also called the Socket T.

Fans or heatsine specification varies depending on the manufacturer. Some model differences include the size and speed of the fan. One manufacturer can produce a 2.36 -inch (60 millimeter) fanThe troop is spinning at 4,800 revolutions per minute (rpm), while another could offer a larger and faster fan at 2.75 inches (70 mm) with a speed of 5,000. The other differences include peak noise, measured in modified decibels (DBA) and air flow speeds in cubic footsteps (CFM). Design of differences in different models can also affect how easy or difficult to install.