What Is an Aluminum Heatsink?
Aluminum profile radiator is also called radiator aluminum profile or solar aluminum profile. Aluminum profile radiator has the characteristics of beautiful appearance, light weight, good heat dissipation performance and good energy saving effect.
Aluminum profile radiator
- Chinese name
- Aluminum profile radiator
- Nature
- instrument
- Features
- Its superior performance is widely used in
- Advantages
- Railway locomotive, household appliances and other industries
- First, please unpack the aluminum heat sink, and then install the air release valve and union.
2.The position of the hole for installing the special hook can be drawn on the wall according to the provided installation diagram or related requirements.
3. When installing aluminum radiators, consider the damage caused by the heating pipe's thermal expansion and contraction to the radiator. [1] 4. Put 12 expansion tubes in and level them.
5. Please use an impact drill to drill the 12 holes. The depth of the hole should be flush with the wall after the expansion pipe is put in.
6. Install the bottom hook. After the requirements are met, tighten the screws.
7. Place the aluminum radiator on the hook that has been installed at the bottom, install the upper hook to adjust the position of the hook, and then tighten the expansion screw after it is tightened. When placing the radiator, place the air release valve on the top.
8. Install and assemble the pipe joints, then install the pipes according to the drawings and connect them with the water inlet and outlet, fasten them everywhere, the back side is 3.5 cm away from the wall, and 5 cm away from the kick angle.
9. Please input hot water, open the air release valve, and deflate until water comes out. The aluminum profile radiator must not exceed the working pressure listed in the instruction manual of 0.12Mpa.
10. The oxygen content in the heat medium shall not be greater than 0.05g per square meter. The medium water used for the radiator should meet PH99, and PH12 when there are internal anticorrosive measures.
- Aluminum profile radiator is also called radiator aluminum profile or solar aluminum profile. Aluminum profile radiator has the characteristics of beautiful appearance, light weight, good heat dissipation performance and good energy saving effect.
- The surface of the processed aluminum heat sink is anodized for surface treatment to increase the corrosion resistance, wear resistance and appearance of the aluminum.
- At present, the types of aluminum radiator commonly used in China are: electronics, electrical appliances, computer radiator aluminum, solar aluminum radiator, power semiconductor radiator profiles, and so on.
- Aluminum profile radiators are widely used in machinery, automobiles, wind power generation, engineering machinery, air compressors, railway locomotives, household appliances and other industries due to their superior performance.
- Aluminum profile radiators are mainly two types: high-pressure cast aluminum and tensile aluminum alloy welding. The main advantages are:
- Aluminum radiators have better heat dissipation and energy saving characteristics. In the same room, if the same specifications radiators are used, the number of aluminum castings is less than that of steel.
- The aluminum profile radiator has good resistance to oxidation and corrosion, without the need to add any additives. The principle is that once aluminum encounters oxygen in the air, it will form an oxide film. This film is both tough and dense, preventing further damage to the body material. Corrosion.
- When choosing an aluminum profile radiator, it is best to choose a high-pressure cast aluminum module combined radiator. This radiator is integrally die-casted at one time, so there is no problem with water leakage from the weld. And its biggest advantage is that the product is not limited by the district heating system, even in the open boiler system, it can not be corroded by oxygen. Because of the modular design, after a heating season, if the indoor temperature is not enough, You can add one or two more in the second year to meet your needs, instead of replacing the entire group of heating like a steel radiator.
- In addition, because aluminum profile radiators have different water quality requirements than steel, you should avoid mixing installation of aluminum radiators with other materials. [1]