What is the crossover crossover Ethernet?
Crossover Ethernet cable connects two computers directly via Ethernet ports, allowing computers to transmit or share data without having to create a network. The Crossover cable eliminates the need for network hardware by direct connection of Ethernet terminals of the computer. The Ethernet Crossover Cable is connected differently from the standard Ethernet cable that is designed to connect to a network router or switch. The Ethernet Crossover cable is required to connect two computers without network hardware.
The biggest advantage of the direct connection of two computers is that it only lasts seconds and does not require any special knowledge or software. Simply connect one end of the crossover crossover cable into the network of one computer and the other end to the port of the other machine. When connected, the computer can "see other hard drives" and replace data as easily as switching from thumb to hard drive, just faster. This is a great way to share large files or copious amounts of data such as music or libraries dIgital images. It is also completely private because the data is not transmitted via the network.
The disadvantage of using the crossover crossover is that it is connected to two machines with a physical cable, so it must be in quite close proximity. Another potential disadvantage is that there is no optional built -in security as in the network. Once both computers are directly connected, users can approach anything in both machines that are not independently protected by permission or encryption of the active operating system. This is not a problem when the user owns both systems, but if children, for example, use the Ethernet Crossover cable to connect a personal computer with a MOM or DAD computer, financial records or other private components should be protected from encryption or other means.
10base-t and 100base-TX Ethernet Cables use a few wires to ship and the second pair that mYou can accept a total of four pairs to connect two computers. So each end of the cable has eight wires and corresponding pineouts. The broadcast pair of each device must correspond to the receiving pair on the opposite device. In the network, this transition is made inside the network hardware. In the Ethernet crossover it is performed internally in the wire itself. Standard Ethernet cables do not overlap and are sometimes referred to as cables "straight through".
crossover cables are available in most electronic sockets and are quite cheap. One can also create its own Crossover Ethernet cable by purchasing the correct category of the cable included and attaching RJ45 connectors at both ends. Wiring diagrams are available online.