How can I choose the best concrete engraving machine?

The selection of the best concrete engraving machine depends on both the size of the task and how much control someone wants in the process of engraving. Concrete engravers that weigh several tons are sold at industrial level and are supplied from China, while smaller models that resemble flossies are also available for jobs that cover a small area. Machines also work on different principles, although most of them use saws and bits with a diamond tip to reduce them into concrete. The simplest and least expensive fishing device Do-it-YourSelf (DIY) is designed to reduce direct and circular patterns to brick material. These machines often resemble a large upright appearance and are constructed from dense aluminum alloys. It runs around 8,500 revolutions per minute (RPMS), they are portable and are easy to store and cut to a depth of 3/8 inches (9.5 millimeters). It is best suited for somewhat softer materials such as brick, paved, tiles and decorative foundationsSlate rather than hardened concrete itself.

More sophisticated concrete knight machines use the form of sandstone technology to etch the complex, fine patterns on the surface and can be used for hard materials such as marble or even brittle as glass. They are cleaner than the diamond cutter when they vacuum dust when they are cut and reused the planted particles for further blasting. This type of machine cheaper than a standard engraving with diamond cutting only about £ 145 (66 kilograms). The disadvantage of the sniper system, however, is that it is designed only to disrupt the fine patterns to the surface of the material that can erode with high floor operation Toblast over time.

For simple geometric patterns such as circles, arches and squares, the best choice of a hand -controlled machine that is not manually controlled. These machines are connected to the guide rods attached to the floor,In order to reduce the pattern without the user's intervention and are built on a fixed chassis with four wheels. It runs up to 13,000 rpm and has spring heads for constant cutting voltage. Although it is not designed to cut complicated shapes, several patterns can overlap each other to add to the sophistication of work.

For very fine, concrete engraving, there is also manual equipment. These machines weigh anywhere from £ 6 to £ 14 (£ 2.7 to 6.4 kilograms) and are designed for very accurate cutting into hard materials. Despite the fact that they appear fragles and are the most portable of concrete engraver machines, they also tend to be the most expensive units that you can buy. They can produce artistic formulas to a depth of approximately 0.25 inch (6 millimeters) and use both cutting bits and pneumatic impacts for forming complex designs or cleaning deeper cuts made by other concrete engraving machines.