How can I choose the best sandbasting material?

You must identify the purpose of sandstone when trying to select the best sandstone material. Different media blasting works better for different types of sandstone and when choosing materials it is necessary to consider a wide range of costs. Sandbasting types you can choose include sand, aluminum oxide and glass balls. Usually you choose sand material according to the reason for sandpit, such as removal of rust or color compared to cleaning and decorating or etched stone or granite. Other areas that you could consider are the ability of the material to reuse and concern the environmental safety. Several types of sandbasting material can be used to achieve the desired result, each of which is for a specific feature. Písek or szy especially Ilica Písek is one of the smaller affordable materials that offer good results when strip work is required. Sand can be used to remove color from buildings, vehicles and other equipment and is also good for removing rustof metal. One disadvantage of using sand is that it is a single use material that involves capturing sand to clean the blasting point.

Another security concerns about silica sand can be seen in the dust of silica oxide, which is a by -product of sanding with sand. When using this type of sandbasting material, special breathing apparatus must be worn. Aluminum oxide (AO) is a good choice for most general sandstones and offers 30 to 40 times longer than sand, but at slightly higher costs. Silicon carbide is a sand material that decreases much faster than AO and is an excellent choice for long -term material, usually lasts almost 50 time longer than AO.

Many other materials can be used for sandbox, from walnut shells and edible soda to steel and glass balls or beads. Some of the materials are known to have a very light touch on the fragile surfaces, fromOthers are known to cut the ability to cut into a solid granite. For a particular job, you can choose any sandbasting material and have very good results. Ideally, you should choose the only Sandbasting material that would work on a wide range of blasting needs, and that would usually be a silicon carbide. Silic carbide allows you to get long -term use from material, faster insulation times than ordinary sand and the strength to better etch the most difficult surfaces while maintaining a fine touch to work on the fragile surfaces by reducing air pressure.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?