How do I create a home lathe?

is a tool or machine used for cutting, drilling, grinding, hip metal, wood, rubber or plastic pieces to make it a symmetrical object. In short, the lathe is used for shaping ceramics, wood, metal, plastic, rubber, etc. Glass, metal spinning, ornamental rotation, etc. Building a lathe at home is possible after several simple steps. Some things such as hand drill, metal metal drill metal metal, steel weighters, pillow block bearings, pine, wood screws, welders and nuts and screws are required for the production of home lathe.

If you want to start making a home lathe, the first step is to lower the piece of metal and weld it to the top of the steel metal rod. A woodworking piece must be connected to this strong metal base for rotation. For this purpose, detect the center point of the metal plate and mark it, which can be easily done by measuring from one corner to one diagonal fromand then repeat it for two more sides. The brand that crosses in the middle of the steel will be the exact center. Now drill holes over this basic metal plate around the center. Then donate it so that the wooden piece can be attached to this basic metal plate.

Use four screws and go through the holes of the base metal plates and a woodworking piece that turns this domestic lathe. Now attach the pillow bearing to the pine board and keep your distance between them. The lathe shaft is supported by pillow bearings during use to keep it at the level. Leave the end of the shaft and saver of the metal motherboard to pass through the pillow block bearings. Connect the coat on the drill and then turn on the drill.

In this way, all pieces are connected to each other. When the drill is on, the pillow block bearings allow the shaft to turn, which in turn rotates the base plate of the lathe. To turn this domestic lathe with a piece of wood, it must be attached to the base plate SOUstruhu with four fixed screws. The screws must be placed over the drilled hole and tightened. This domestic lathe is now ready to turn pieces of wood and shape them in any way that is searched.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?