What Are Pedestrian Signs?
Direction signs are one of the main signs in traffic signs. It is used to instruct vehicles and pedestrians to drive in prescribed directions and places. The color of the indicator is blue and white. The shape is divided into circle, rectangle and square.
- Direction signs are one of the main signs in traffic signs. It is used to instruct vehicles and pedestrians to drive in prescribed directions and places. The color of the indicator is blue and white. The shape is divided into circle, rectangle and square.
- The sign indicates that all vehicles are only allowed to turn left (or right). Set a proper position before the intersection where the vehicle must turn left (or right). When there are special regulations such as time and vehicle type, auxiliary signs or additional patterns shall be applied.
- Direction signs are one of the main signs in traffic signs.
- Go straight sign
- Indicates that all vehicles are allowed to go straight. Set in front of the intersection where you must go straight.
- Go straight sign
- Turn left (or right) sign
- Indicates that only all vehicles are allowed to turn left (or right). Set a proper position before the intersection where the vehicle must turn left (or right). When there are special regulations such as time and vehicle type, auxiliary signs or additional patterns shall be applied.
- Go straight and turn left (or go straight and turn right) signs
- Indicates that all vehicles are allowed to go straight and turn left (or go straight and turn right). Set a proper position before the intersection where the vehicle must go straight and turn left (or go straight and turn right). When there are special regulations such as time and vehicle type, auxiliary signs or additional patterns shall be applied.
- Turn left and right signs
- Indicates that all vehicles are allowed to turn left and right. Set in front of the intersection where the vehicle must turn left and right. When there are special regulations such as time and vehicle type, auxiliary signs or additional patterns shall be applied.
- Keep right (or left) road sign
- Indicates that all vehicles are only allowed to drive on the right (or left). It is located where the vehicle must drive on the right (or left) road. When there are special regulations such as time and vehicle type, the auxiliary signs shall be used.
- Interchange driving route sign
- Indicates that the vehicle can go straight and turn left (or go straight and turn right) according to the route shown at the intersection.
- Interchange driving sign
- Roundabout sign
- Indicates that vehicles are only allowed to travel on the right. It is located at an appropriate position around the island facing the traffic coming from the intersection. Priority should be given to vehicles in the inner ring when vehicles enter the roundabout.
- One way road sign
- Indicates that all vehicles are moving in one direction. Locations at intersections and entrances on one-way streets. When there are special regulations such as time and vehicle type, auxiliary signs or additional patterns shall be applied.
- Walk sign
- Indicates that the street is pedestrian-only. Located at both ends of the pedestrian street.
- Honk sign
- Means that vehicles must honk at the sign. It is set at the starting point of bad sight sections such as sharp bends and steep slopes of highways.
- Minimum speed limit sign
- Indicates the minimum speed limit for a motor vehicle to enter the road ahead. It should be located at the beginning of the speed limit section of expressways or other roads, and at a suitable position behind each interchange entrance.
- This sign shall be set on the same sign post in conjunction with the maximum speed limit sign, rather than being set separately. For roadside installation, the maximum speed limit sign is up. The minimum speed limit sign is down; when it is installed on a gantry or cantilever, the maximum speed limit sign is left and the minimum speed limit sign is right.
- Road ahead sign
- Indicates that the main road vehicles can be prioritized. It is located in a proper place before a main road intersection with a stop sign.
- Car ahead sign
- Indicates that the vehicle can travel preferentially during the meeting. It is used in conjunction with the forbidden sign for traffic concession 39 and is located at the other end of the section with the sign for concession traffic. The color of the logo is blue, the oncoming car is a red arrow, and the direction of travel is a white arrow.
- Crosswalk sign
- Indicates that it is a crosswalk. Logo colors are: blue background, white triangle, black pattern.
- Crosswalk
- Set at appropriate positions at both ends of the crosswalk line.
- Lane direction sign
- Indicates the driving direction of the lane. Set in place before the guide lane. The arrows in the figure can be used in reverse when needed.
- Dedicated lane sign
- It is used to notify that the lane ahead is exclusively for designated vehicles, and other vehicles and pedestrians are not allowed to enter.
- a) Bus lane lane signs
- Indicates that the lane is reserved for buses traveling on this line. It is set at a suitable position before entering the starting point of the lane and the entrance of each intersection.
- b) Motor vehicle running sign
- Motorway
- Indicates that the road is for motor vehicles only. It should be located at the starting point of the road and in front of each intersection and entrance.
- c) Motorway lane markings
- Indicates that the lane is only for motor vehicles. Set at the starting point of the lane and in front of each intersection and entrance.
- d) Non-motor vehicle sign
- Indicates that the road is only for non-motorized vehicles. It should be located at the beginning of the road traveled by non-motorized vehicles and at appropriate positions in front of intersections and entrances.
- e) Non-motor vehicle lane markings
- U-turn allowed
- Indicates that the lane is only for non-motorized vehicles. Set at the starting point of the lane and appropriate positions in front of intersections and entrances [1] .
- U-turn sign allowed
- Indicates that motor vehicles are allowed to make a U-turn. Set a proper position before the starting point and intersection of the road section where motor vehicles are allowed to make a U-turn. When there are special regulations such as time and vehicle type, the auxiliary signs shall be used. [1]