What are the best tips for the security of the excavator?

Whenever a piece of heavy machine is used, it is necessary to take the right safety measures to ensure that people and property are not injured or damaged. The security of the excavator begins with conscious and understanding the function of the excavator. This machine has a wide range that can be quite dangerous when it is not operated properly. Of course, the most important safety feature of any machine is the operator, so to maximize the security of the excavator, the operator should be properly trained both in the operation of the machine and in safety procedures to prevent damage and injury.

One of the more dangerous situations that the excavator can create is subordinated. This happens when the bucket is used to dig the ground under the track of the excavator, which increases the probability of the cave. The security of the excavator begins by realizing the position of the lip hole and ensuring that the bucket does not kick too closely to the tracks. The bucket congestion can also lead to a dangerous situation of the excavator so the operator should ensure safeOst excavator by being aware of the load limits for the machine. The bucket overload can cause the machine to lean or otherwise unstable.

The operator should also make sure that the machine has enough fuel before it starts to use it. In order to ensure the correct excavation safety, the machine should always be able to work, allowing the user to release an unstable load in an emergency. Low fuel levels may mean that the excavators stop unexpectedly and create a potentially dangerous and unstable situation. Visual control of the machine before surgery is also a good step towards safety of the excavator, as it may be visually obvious damage to the machine or other hazardous conditions.

The soil assessment before the excavator leaves it should also be the security of the indention. The operator should be able to assess Whetjei soil is safe to avoid heavy excavatorLand. The operator should avoid placing the machine too closely to the edge of the hole or ditch, and if people are inside a ditch or hole, this area should not work in this area until all other workers are clear. Outside the machine, workers should also be aware of the function of the machine to avoid caught in the footsteps, contacted by a bucket, or are caught in a cave.