What are the different types of dust collectors?
dust collectors can be used if a large amount of dust needs to be removed. Industrial industries that have such problems include mineral plants, machines and powder processing plants. Dust collectors allow you to separate dust from air or other gases. Four primary types are inertial separators, filters, wet washing machines and electrostatic bullets.
Dust separation from gas is often used inertial separator. This is possible using gravitational, inertial and other forces. The combination of used forces varies according to the type of inertial separator. The settlement of the chambers, the Baffle Chamber and the centrifugal collectors in this category are the three most common types of dust collectors.
Every type of inertial separator has advantages and disadvantages. It is easy to design, but they tend to have poor efficiency. The chambers of the partition can be more efficient, but are usually limited to use as preliminary cleaners. The centrifugal collectors who use a cyclone action are likelymore discontinuous inertial separators. Their advantage is efficiency. Filters
usually separate the dust from the gas using the screen filter system. Normally the gas flow containing dust enters the structure known as a bag. Baghouse contains screening that can be made of various materials such as felt cotton. Dust then delivers the screening material to the surface when the gas passes. These dust collectors have a reputation as one of the most effective and effective when considering a lot of fine dust.
Wet washing machines are dust collectors that use fluid to perform separation tasks and absorb fine dust. Water is the most common scrubbed liquid. There are many wet washing machines and there are several modes of operation. Normally the scrubbing of the liquid captures the dust in droplets that are collected and removed. Then the scrubbed air or gas mubat is demisty, the process that removes PControlled humidity.
Electrostatic bullets are regularly used to separate dust particles from dusty air streams by electrostatic forces. With these dust collectors, dirty air flows through the passage into the ionizing area, where dust particles receive a negative charge as they pass between electrodes. Then the particles are attracted by positively charged electrodes on the collection plates, while clean air flows.
The two main types of electrostatic dust collectors are one -stage bullets that are high voltage, and two phase bullets that are low voltage. In general, there are two options for high -voltage disposable bullets, plates or tubes. Two phase electrostatic bullets, which are considered more efficient, are commonly used in plants dealing with extensive welding or wood processing.