What Is a Baling Press?
The baler is also called a strapping machine, a tapping machine, or a strapping machine. It uses a strapping tape to bundle the product or package, then tightens it and combines the two ends by a hot iron and hot-melt bonding. The function of the packer is to reinforce the packaged items, so that the items are not scattered due to inadequate bundling during transportation and storage. At the same time, the bundling should be neat and beautiful.
Baler
Baler also known as
Structural composition of the baler:
The baler is mainly composed of belt feeding, unwinding, joint connection and cutting device, transmission system, and track.
The products of the baler series include: automatic baler, semi-automatic baler, fully automatic baler, pressure baler, etc. The baler products have passed CE, SO9001 and other domestic and international certifications.
1. According to use:
1.Integrated circuit design: new circuit design. The packer uses a plug-in circuit board to control the entire packing action and the temperature of the hot head. The circuit board is quite easy to replace and the packer service is convenient.
2. Instant heating, immediate packing: Innovative high-speed hot-melt system design, which can make the hot film work within 5 seconds, so that the PET packing machine enters the best packing state.
3. Automatic shutdown device, power saving and practical: When the packing operation is completed and no longer operates within 60 seconds, the packer has a compact structure design and the motor will automatically stop and enter the standby state.
4. New brake design: The brake of the strapping machine with a disc adopts a special spring design to ensure smooth and noise-free belt feeding, and the price of the strapping machine is reasonable.
Principle characteristics
1. This machine adopts new integrated circuit, and the access type PC board controls the whole package action.
2. The whole machine combination is perfect and mature, with extremely low noise, reducing work pressure;
3. The packing speed is fast, each packing only takes 2.0 seconds; instant heating, the heating sheet can work in 5 seconds, enter the best packing state, save electricity and practical;
4. Stand-by status at the stop position within 60 seconds after the packing operation is completed, a new generation of electric steel sheet design;
5. Improved design, elaborate manufacturing, wide range of use, no matter the size of the package, you can pack without adjusting the machine;
6. The machine is a mechanical structure, some of which are imported parts, the rear blade is stable and reliable, and easy to adjust.
7. The baler has a high table top, which is easy to operate and suitable for packing lighter items.
8. There is no characteristic of deformation and short circuit, and the scope of application is wide;
9. Any market
The packing object is basically in the middle of the packer. First, the right acrosome rises, press the front end of the strap, tighten the strap on the object, and then the left acrosis rises, compacting the appropriate position of the lower strap, and the heating sheet extends into the middle of the two straps. , The top knife rises, cuts the belt, and finally sends the next bundle of straps in place to complete a working cycle. A baler is a machine that uses packing tape to wind a product or package, then tightens and fuses the two ends by thermal effects or uses materials such as buckles. The function of the strapping machine is to make the plastic tape close to the surface of the bundled package.
PP / PET plastic steel belt hand tool
Performance characteristics
Plastic strap combination strapping machine
The reformation of the traditional plastic strapping machine with the tightening and separation of the buckle is integrated into one
The strapping machine has the characteristics of compact structure, light weight, large tightening force, firm lock and convenient operation.
Technical Parameters
Product Specifications | SD330 |
Applicable bandwidth | 13-19mm |
Applicable band thickness | 0.4-0.9mm |
Pincers | Choose 6/8, 5/8, 1/2 |
PP / PET plastic steel belt power tool
Performance characteristics
Applicable packing belt: PP, PET belt
Type of sealing tape: friction welding
Action mode: automatic tightening, electric welding
Technical Parameters
Product Specifications | ORT200 |
Machine size | 375 (L) × 130 (W) × 140 (H) mm |
Tightening force | 200kg |
Strapping | PP belt: 12-16mm width 0.5-1.0 thickness PET belt: 12-16mm wide and 0.5-1.0mm thick |
Form of sealing tape | Friction welding |
power supply | 12V 2.4Ah battery |
Machine weight | 3.9kg |
PP / PET plastic steel belt pneumatic tool
PP / PET
The belt is delivered to the position the binding signal is received the brake is released, the main motor is started (1) the right top knife is raised, and the right belt is on the slide (2) the T -shaped guide plate is retracted (3) the proximity switch senses Withdrawal probe (4) main motor stops, brake pulls in (5) baler withdrawal motor rotates, withdraw 0.35 seconds (6) strap tightens on object (7) main motor starts again , The brake pull-in (8) the large swing rod pulls the belt twice, tighten the belt (9) the left acrosome rises, press the lower belt (10) the heating piece extends into the middle of the two belts (11) the middle top knife Rise and cut the tape (12) Middle top knife goes down (13) Middle top knife goes up again to make the two straps firmly adhered (14) Middle top knife goes down, left and right top knife go down at the same time (15) Heating sheet reset ( 16) Slide back (17) Reset the T guide (18) The proximity switch senses the tape feeding probe (19) The tape feeding motor starts to drive the tape feeding (20) the large swing bar reset (21) The strap is in place, and the head is pushed to the T guide (22) The proximity switch senses the dual probe (23 main motor is stopped, the brake pull (24) baler complete a cycle.
1. Please confirm the power supply used by the machine, do not plug in the wrong power supply. This machine uses a three-phase four-wire system. The flower wire is a grounded neutral wire for leakage protection.
2. Do not pass your head through the belt's runway during operation;
3. Do not touch the heater directly with your hands;
4. Do not wash the machine with water. When the workplace is wet, the operator should not work barefoot;
5. When the machine is not in use, please rewind the tape in the storage bin to the reel to avoid deformation when the machine is used next time;
6. Do not stick oil on the surface of the conveyor roller;
7. Remember to unplug the power when the machine is not in use;
8. Do not replace parts on the machine at will;
9. The main parts should always be lubricated with oil.
In fact, as long as it is used strictly in accordance with the correct operation method and pay attention to daily maintenance, it can effectively reduce the damage and ensure the normal operation of the equipment.
Status of China Packaging Machinery
China's packaging machinery started late. After more than 20 years of development, China's packaging machinery has become one of the top ten industries in the machinery industry, which provides a strong guarantee for the rapid development of China's packaging industry. Some packaging machinery has filled domestic gaps and has been able to basically To meet the needs of the domestic market, some products are also exported. At this stage, China's packaging machinery export value is less than 5% of the total output value, but the import value is about the same as the total output value, which is far from developed countries.
Packaging speed: 1.5sea / strap
The smallest package: 60mm
Maximum tightening force: 60Kgs
Maximum Package: Any
Packing PP belt width: 5mm-15mm
Power supply: 220V (50 / 60Hz)
Drive motor: 220V 220W
Baler volume: 1490 × 570 × 530mm
Baler weight: 80Kg
The main technical parameters of the classic baler, other types are similar to these parameters
Suitable for regular object packing
Rolling mill, recycling processing industry, non-ferrous and ferrous metal smelting industry, and renewable industry Y81 series hydraulic metal baler (also known as scrap iron briquetting machine) , Waste stainless steel, scrapped automobile scrap, etc.) Extruding long-range cubes, octagons, cylinders and other qualified charge materials can not only reduce transportation and smelting costs, but also increase furnace speed.
