What Is a Brick Machine?

"Brick machine" as its name implies is the machinery and equipment for producing bricks, which generally use stone powder, fly ash, slag, slag, crushed stone, sand, water, etc. as raw materials. Efficient use of fly ash, slag, stone powder, desulfurized ash, slag, coal gangue, phosphogypsum, tailings sand and other new wall materials, such as autoclaved fly ash bricks, autoclaved lime sand bricks, aerated concrete products, etc.

Brick machine

A brief summary is as follows: scientific ratio of raw materials ---- adding water and stirring ---- high pressure vibration molding ---- short time drying ----- finished products leave the factory

Brick machine is divided into two categories: vacuum brick machine and non-fired brick machine. The former is a brick made of soil, which requires a lot of soil to make it, which is a waste of resources. The latter is a waste coal gangue, shale, stone powder, fly ash, slag, slag, crushed stone, sand and other systems. It is more environmentally friendly and saves resources without going through the firing process, and has been vigorously promoted by the state.

The bricks produced by the vacuum brick machine use clay as the main raw material. The production process is simple, but the damage to the cultivated land is more serious. In 2015, the state successively issued policies prohibiting the production and use of clay bricks, and vigorously promoted the reuse of solid waste. And brick products with fly ash as the main raw material and gypsum and quicklime as the main cement are gradually replacing traditional clay bricks.

The process of producing bricks by a vacuum brick machine: Use a clay mixer to stir the clay, mix some sand, and stone powder, mix them evenly, and then transfer them to the vacuum brick machine through a conveyor belt. After extruding under the vacuum pressure of the vacuum brick machine, form the bricks After the bricks come out, they are cut through a blanking machine to cut into uniform-sized bricks, and then they are automatically picked up by the yard machine, placed in a kiln car, and fired in a furnace.

Fly ash brick

Brick machine is a general name for a series of brick making machinery and equipment for manufacturing a series of products such as colored bricks and cement bricks in the building materials industry.

1. The advanced technology of German block making machine is adopted, which is thick and stable, and the weight exceeds 30% of the weight of the same domestic production model, and the shock absorption effect is significant.

2. It adopts computer control system, LCD touch screen to adjust parameters, and is equipped with data input and output devices to realize human-machine dialogue.

3. The computer control system has a self-locking function. The previous action is not in place, and the next action cannot be performed, which prevents the occurrence of misoperations, so as not to damage the machine. And remote fault diagnosis can be achieved through telephone lines.

4. The body adopts thick-walled square tube and ultra-long guide sleeve to ensure the body is firm and shock-resistant and the indenter moves accurately.

5. The center of gravity is extremely low, and the vibration table is 486MM away from the ground, ensuring that 90% of aftershocks are introduced to the ground, extending the life of the equipment.

6, good synchronization. The indenter and demolding frame are all equipped with adjustable synchronous swing arms to ensure that the indenter and demolding error are within + 1MM.

7, a wide range of products. The installation of secondary distribution equipment can simultaneously produce a variety of products such as hollow blocks, multiple rows of holes, hollow bricks, curbs, split blocks, colored pavement bricks, grass planting bricks, washed bricks, etc.

8. Vibration and pressure separation technology. The vibration support plate is installed, and the auxiliary indenter is also equipped with a shock-absorbing rubber pad to completely block the vibration and pressure interference.

9.Using Taiwan hydraulic valve and

" Brick machine " is a collective name for brick production equipment. According to different classification standards, there are many types.

According to sintering or not, it can be divided into: sintering brick machine and

This chaotic brick machine market , whether we want to buy

1. When the machine is running, all protective covers and floor covers must be installed.

2. Check the ground wire of the electrical part to avoid leakage and short circuit.

3. It is strictly forbidden to stand in the direction of the motor to avoid accidents.

4. When it is found that the machine is abnormal, it should be stopped and checked immediately.

5. When the brick machine is not started, it is not allowed to start the feeding mechanism, so as to avoid damage to the blank parts due to overload.

1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

The mixing cylinder of the non-burning brick machine is driven by a ring gear. When working, it rotates forward and stirs, and discharges material in reverse . It can stir plastic and semi-dry rigid concrete. .

The non-burning brick machine has a reasonable structure, and has the advantages of high production efficiency, good mixing quality, beautiful appearance, and convenient movement. It is a more advanced model.

1. When using a non-burning brick machine, it must be placed in a solid place, stabilized by a bracket or a foot tube, and not supported by tires.

2. Before starting the non-burning brick machine, check the clutch, brake, wire rope, etc., and there should be no foreign objects in the drum.

3. Note that when the feeding hopper is raised, it is strictly forbidden for anyone to pass or stay under the hopper. After the brick-free machine is finished, the hopper should be fixed and then left.

4. When the burn-free brick machine is running, it is strictly forbidden to extend the tool into the drum to avoid accidents.

5. It is strictly forbidden to operate without a certificate, and it is strictly forbidden to leave the work station during operation.

6. During the maintenance of the burn-free brick machine, the hopper should be fixed and the power should be cut off.

7. The operator must understand the instructions, be familiar with the working principles and procedures, and operate the equipment as required. Non-professional operators are never allowed to operate this equipment.

The factory-made machines have undergone factory tests in the factory according to relevant regulations. However, due to long-distance transportation and long-term storage, the following inspections should be performed when installing the burn-free brick machine:

1. Check whether the brick machine is damaged or deformed during transportation (especially pay attention to the hydraulic pipeline).

2. Check whether the fasteners of the main parts of the brick making machine are loose.

3. Check the reducer. Whether the oil tank and lubrication points of the vibrating table are refilled as required, and whether the amount of oil is appropriate.

4. In addition, a comprehensive wiping work should be carried out on the non-fired brick making machine. Before the test machine, the parts that slide relative to each other should be lubricated according to regulations. If the machine is disassembled due to transportation needs, it can be divided into forming devices, plate feeding devices, feeding devices, brick ejection devices, palletizing devices, phase electrical control devices, etc., and must be assembled in place according to the assembly relationship during installation.