What is the ass?

The buttfly is a form of a montage that is produced by combining two ends or butts of two objects without any type of overlap. Although this technique is usually associated with the process of editing the film, it is sometimes also used in the projects of wood processing and renovation of houses. When the assignment is properly, the connection to the assing of the butt is almost impossible to detect, allowing uniform continuity to the surface of the now connected objects.

Far and far, the concept of the butt is most associated with editing films, especially when preparing the film coils for movies. This approach, which is used extensively in the mid -20th century, requires an accurate equalization of two parts of the film. Unlike other montage forms that create the Union by overlapping the end, the film cut requires a thin adhesive that is applied to two ends to be connected. Once the adhesive sets, the level of force on the joint phenomenon near the gap between each film in the movie, allowing the main copy to run through the duplicator and napočIT as many copies of the film as required.

A similar approach is used in a sound ass. During the days of audiocassets with a cut of this type sometimes used to repair a broken tape on the cassette. This approach usually required to cut off the damaged section and then joined with these two ends with a small amount of adhesive. In some cases, the basic part of the adhesive tape was applied to the underside of the tape and effectively formed a bridge that joined both ends. Repairs of this type helped minimize the damage to the cassette, although the process would create a minor problem with sound quality at the point where both sections were connected.

Around the house, the butt is common with the installation of the rail with a chair and the Moldings Crown. Lowering two sections to size, ends are connected using wood glue or similar adhesive. Depending on the design of forming or railing, a small amount of completed the joint may be applied to the jointVaca mud, which effectively helps mask the seam as soon as the railing is painted. This approach allows you to use odd parts of wood materials that would otherwise have to be discarded.

The idea of ​​the butt is also used in the production of rubber materials such as seals. Once the rubber material is vulcanized, the ends are placed together and left to connect as the material cools. After the joint allows you to set and cool, it often does not leave more than just a hair comb, which is very difficult to detect.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?