What is compression?
Crime compression is an effective method of joining or terminating cables or conductors. The term refers to the process of limiting or compressing the eye or ferrule firmly around the wire to form a safe mechanical or electrical connection. Climating compression is usually done by hand or hydraulically powered tool equipped with specially designed jaws that compress the rail or eye to facilitate crimping. This type of crimping tool generally supplies oval or hexagonal restrictions on the connector body, which, if the size of the connector is correct, forms a clutch or end high force. The compression crimper does not delay or cause any part of the connector, as is the case with stinging, so it is ideal for use on hard, individual wires.
CEMPRESSION CRIMP is a fast and cost -effective way to achieve a good connection. Compression crime are usuallyFull with a jaw pliers equipped with one or more crimping points. These crimping points are usually placed with half on each jaw tool. After closing, both halves form an oval or a hexagonal opening. These crimping points are generally numbered or have the intended Ferrule or eye size to indicate the correct ending. These crimping points are smaller than the connectors for which they are intended; When such a connector is placed in the hole and limited, the tool compresses the body of the connector firmly on the wire.
crimping tools range in size from small hand tools of pocket to hydraulic machines capable of crimping the largest cable joints with high voltage. Hand -controlled examples may have jaw joint systems that provide a greater mechanical advantage in crimping larger connections. Hydraulic crime can be connected to an external hydraulic source or equipped with an integral hand pump system to complete Crimps. ThyThe machines usually have a head of a clam that receives several different dies for different connector sizes.
There is a wide range of ferrles for connecting cable and eye to end cable, which are suitable for compression crimping applications. These are usually made of copper for electrical connections and aluminum or steel for mechanical joints. Mechanical compression crime is usually used on small applications with light loads, such as stuck traces of steel fishing and steel ropes with bearing. Compression crimping is more suitable for electrical wires with one spring than sting; It does not push the Ferrule into a wire that tends to weaken the copper core, which often causes to break.