What is a corner strut?
Corner braces is a relatively wide term used to describe a wide selection of elements used in the processing of wood to decorate, strengthen and protect corner joints. These elements fall into two basic categories: external and inner braces. The outer corner braces generally serve as decorative finishes and as protection against impact damage. Internal braces are more of a structural supports to strengthen the corner joints against pressure failure. External braces are usually made of brass or steel, while internal braces can be made of metal or wood.
The corners of wooden structures and furniture are particularly susceptible to damage and structural failure. The use of the corner orthosis can negate these weaknesses. Because of this function, their use is a relatively common practice in construction and cabinet.
corner reinforcement can be used in one of two ways. The first is the outer brace, which is most often used in the production of furniture, Bednas and cartons. These braces withThey only use the corner to cover, or stretch along the edges of the flat surfaces between the corners.
outer corner braces are usually made of decorative metals such as brass or steel, and often have highly decorated ornaments or engraving. They usually consist of a triangular shape of the plate bent down at 90 ° angles along two of its edges. The screws are used to attach the strut to the wood on all three sides that effectively obscure and lend protection and decoration to the exposed corner. Although it serves the same purpose, external braces used on the balls and heavy cardboard cardboard are utilitarian and simple. This type of corner orthosis can consist of more than a simple tape in the shape of a metal tape attached to a box with glue or nails.
The second type of corner orthosis is the inner type that serves as the structural force of the ning to avoid the collapse of the corner jointU for structural load or impact or pressure. These braces are usually metal parts in the shape of the letter L or direct members of the wood, which are screwed on the opposite sides of the corner joint. They are usually used in construction to strengthen the corners in wood structures. They are also often used to strengthen the corner joints of furniture such as tables and chairs.
One specific type of corner orthosis commonly used to strengthen the corners of the table is Kerf srtez. This orthosis consists of a vaulted plate with a hole in the middle and two lips that bent at approximately 30 ° at both ends. These lips are wearing small projections that fit into vertical kerf or grooves sliced on the opposite sides of the aprons of the table. The lips are then screwed to the sides of the apron to provide additional support. The screw set in the foot of the table passes through the center hole and is filled with a nut and pulls two sides aprons together and the corner solidification.