What is the death holder?

matrix holders are tubular parts that attach to the tailstock lathe. After the matrix installed, the holder can remain stationary because the material to be cut to the spindle is transferred to the matrix, or the material to be cut can remain stationary and the matrix holder is made to rotate in the tail. Using death, the fibers can be machined on the material in the shape of the rod.

The tail holder is a tube that is suitable for a narrowing part that connects it to the tailstock lathe. Tailstock is usually kept stationary, while the rod attached to the rotating spindle is forced through it to put it on. Matrix holders usually have three screws near the side of the spindle pointing tail to place a die, a cylindrical disk containing a cutting tool. Holes symmetrically cropped with a tool for cutting threads are for chips of metal or other material. The metal tokens that come from the machined part are first thrown into these holes and then the deadly clutch is raised.

and hex matrix is ​​one that is shaped as a hexagon, with flat sides that are the same in length. This type of matrix can be accommodated in regular circular death holders with adjustable holder screws, unless its radial dimensions are larger than the inner diameter of the circular matrix holder. The simple HEX holder holder uses the flat sides of the hex matrix and stabilizes it above and so on. In this mode, it is not expected that it turns and can only perform its function when the material controlled by the spindle is forced.

ACORN DIE holders have a built -in clutch mechanism that allows the holder to be released without shock. When the acorn cap holds the oak seed, the acorn holder uses a similar technique for holding a circular matrix. Rather than using screws to repair a circular or hexagonal, Acorn Die holder includes circular circular dies on the sides and blockIt goes to the thickness of the matrix to create a tight adaptation with the rest of the holder, tapering area and tailstock. With the ability to rotate, the advantage of this type of matrix holder is easy to place and release.