What is the disk filter?

The disk filter is a special type of water filter that contains a cartridge in the shape like many disks stacked on another, and the discs are able to remove dirt from the water. Watering through the discs does it and small grooves dug into the discs capture any dirt. Disc filter units are mainly used for irrigation of plants, but metallurgists also used very large models to remove dirt from water from water. Cleaning the stationary pile of disks can be difficult, so the disk filters can be released filters, allowing the discs to move and operators clean the dirt from the filter.

There are many types of water filters, all made for a specific purpose, or a certain dirt. The disk filter has a filter that looks like a column of discs stacked on top of each other. Each disk has small grooves that are made to capture dirt when water runs through discs.

while humans can be negatively affected by bacteria in water, naturally occurring dirt in waterGenerally, they do not affect much if these impurities are at high concentrations. However, plants are not as hardy against low dirt levels as sodium, sulphate and chloride, either because dirt directly damages the plant or changes the potential hydrogen level (pH) of the soil. If soil pH becomes too alkaline or too acidic, it could cover the growth of the plant or kill it.

Discs on the disk filter are made to have a constant deposit of dirt, so the filter will have to be cleaned regularly. The lack of this filter will cause to fill, and the impurities that would be caught flow around the filled grooves and remain in the water. To help clean the discs, the filter can usually be released to allow the discs to rotate and move. This allows operators to clean everything from a filter without a HAVING.

Irrigation of plants is the primary use of filtRU disk, but can also be used to clean water full of metalluric material. The discs on this filter are much larger than the irrigation models. With this filter, the discs are spinning and collecting material; The material then cakes on the sides, so it is easier to lift. The discs spin until they are usually treated with heat through the drying zone where the disk is usually treated. Once it is dry, material cracks - either in itself or with the help - and are destroyed.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?