What is the feed for drills?

The source source is the speed that the drill is inserted into the object to force a hole. This factor is usually very closely tied to the drilling speed, which is how quickly the bit turns. Drill feed is usually represented in the picture, such as millimeters or inches for the revolution, so if the drilling rate changes, the feed rate must also be. The correct speed of the drill feed can be determined by a number of factors such as drilling equipment, bits and material from which the workpiece is made. Some materials require slower drill feed, while others can receive higher sources but require more energy from drilling equipment. In any case, this term concerns the rate of feed and the rate of cut, which are two interconnected factors. Feed rates usually refer to a moving component in the system and can be expressed in the distance values ​​over time for linear processes, such as a mill distance to revolution in machining applications that include rotation. SinceDrilling is a process that includes a rotating bit used to give birth to a hole, this type of machine work is considered a rotating application.

The speed of the drill feed is simply the speed with which it is brought to the workpiece. Every time the bit turns once, it is inserted into the workpiece of the exact amount. If the drilling rate and the feed increases constant, the bit will be inserted at faster speed. The reason is that the number of revolutions per second increases when the drilling rate increases, which in turn causes the bit to proceed further with every second.

The appropriate drill speed can be calculated on the basis of a number of factors, including drilling equipment and a particular workpiece. The Must drilling device will be strong enough so that the bit is not tied in the workpiece, so that when negotiating with low energy units, slower feed for drills is usually required. Low feeds are also necessary in JEditing with certain workpiece materials that can collapse, sort or break if excessive pressure exerts. The right drill feed may also depend on the diameter of the drill bit and the materials from which it is designed.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?