What is the connector of the flange?
The flange connector is a device that allows you to connect many types of hoses and fittings to a flange pipe. Typically made of stainless steel or high carbon steel, the flange connector is connected to the flange pipe with screws and the seal is inserted between the flange of the pipeline and the connector. The flange connector, common in manufacturing devices, is often used to put smaller and more mastered hoses from a large feeder. The flange connector can also be used to block the pipeline. The flanges allow disconnecting and removing the pipes for cleaning, maintenance and changing the route of the pipeline. Many production equipment uses a large diameter pipeline to supply an area with sufficient material flow, such as adhesive, to complete production processes that occur in the area. The ATTA is often used by a flange connector and easier to use a line or hose or pipe hose, and then a tool or device that uses a worker at his workstation.
There are many types of flange connectors that can be used to allow pipes to be connected to different sizes and hoses, measures and blocking plates. Hard lines and soft hoses can be connected to the pipeline using the flange connector. In most cases, the connector can be changed in a very short time, allowing the line to adapt to the changes in the reconfiguration of the product running or reconfiguration of the workstation. Depending on the type of seal used between flanges, new seals may not be required when flanges or pipe connections change. On high -pressure or food pipes, it is commonly recommended to change the seals to reduce the occurrence of leaks and bacteria in the flange area.
Materials that are set in the manufacture of the flange connector are usually made of stainless steel or forged alpine steel. In food and highly corrosive liquid transport in the entire device, stainless steel is commonly used for pipes and connective componentssteel. Most other applications, such as water or sewer pipes, use either aluminum or forged carbon steel to produce gas pipeline and all related components. The most common type of flange connector is made of stainless steel and uses the nipple to connect a knitted line made of stainless steel to the pipe.