What is the flange gate?
The flange gate valve is a conventional gate valve that contains a pair of integral flange boards at the ends of the valve body. This allows you to add the valve to the existing pipes in a standardized system with minimal effort. Gate valve is a type that has a circular disk that is lifted or dropped in a tight chamber to allow or reduce the valve fluid flow. The flange boards are usually round, flat plates mounted at the right angle to the flow of the fluid flow at both ends of the valve body. These plates are equipped with a series of holes around their perimeter through which the mounting screws are inserted.
Gate valve is a member of a family with multiple swivel valves and one of the most commonly used valve types in a number of industries. They consist of a round, flat disk or gate, which is attached to the stem of the screw type under the thread. At the bottom of its travel, the disk closes the flow of liquid through the valve chamber. When the vallstonek turns, the valve gate rises to openflow route.
The flange gate valve is a specific type that contains a pair of flange discs, one at both ends of the valve body. These are usually round plates that are open in their centers as integral parts of the valve body. The discs are drilled by a series of holes located around their perimeter, which are used to mount the valve. These discs allow you to mount the existing flange valve on the existing flange in standardized pipe systems. However, if the valve must be mounted on a non -standardized flange, a number of adapters are available to facilitate installation.
In order to mount the flange gate valve, it is simply placed against the existing flange and turned until the holes in two flanges are equalized. The bolts are then inserted into both flanges and tensioned to secure the valve. The process is then repeated with departinga tube at the other end of the valve. This method of non -performance assembly is convenient and efficient because it allows for quick and easy replacement or movement of the valve.
The flange gate valve is usually used in large high -pressure systems in industrial and production environments. The valve flanges may have a simple design or include the groove of the ring flanges to include other sealing rings. The flange closed valve is generally made of stainless steel, cast iron or brass.