What is a gerotor?

and gerotor is a tool used for pumping fluids. The unique hydraulic design of this small circular rotor provides a smooth and consistent method for pendulum oil, water and other liquids in the closed tube system. This method of drawing has many advantages and is used by various industries.

The term "gerotor" is short for "generated rotor", an instrument that was invented in 1921. European engineer Myron Hill devoted many years to the development of this pump. After creating a gerotor, he also developed a large amount of geometric theory based on the use of rotors. This circular rotor actually has a second rotor. The inner rotor has a certain number of elongated teeth and is located outside the center and the outer rotor has one more tooth than the inner rotor. When both rotors rotate, the teeth are locked and unlocked due to the location off the center, creating the operation between the rotors between the rotors.

Gerotor works as a pumping mechanism when the liquid passes the teeth and createssuction ports. The liquid drives the rotors and turns the gear, creates suction and drain ports whenever the teeth are fitting together. Turning and a network of teeth also creates a tight seal between these ports and sucks the liquid through consistent speed.

This type of pumping system has many advantages over traditional motor pumps. Its most visible benefit is that its lower number of moving parts and valves prevents it from breaking down as often as other pump systems. The consistency of vacuum with its own drive is also beneficial because it moves liquid at one speed based on the pressure of the liquid. This differs from pumps driven by an engine because it does not require any setting or monitoring for proper design or monitoring.

Gerotor pumps are used in many industries and in many ways. The automotive industry has accepted this technology using Gerotos in everything aboutD Fuel injection systems after power steering drives. The production industry also found ways to use these rotors, especially if the oils need to be sent through a tube over a long distance to lubrication of machines. Factorys that produce oils such as cooking oils also use a vacuum -powered system to transport goods.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?