What is a boys' wire?

Guy Wire is a stabilization strut used to secure or keep a brand or structure. It can be made of rope, wire or cable. One end of the wire is attached to the structure or brand, and the other end is anchored at a distance to a stable ground building with voltage. Cint wires are commonly used for tents, ships and radio masts, utility tents, wind turbines, awnings or canopies.

In order to allow the voltage of several guys to compensate for others and provide optimal support, they are often equally distributed around the structure. These configurations can be tria, pairs of couples or other sets suitable for secure structure. An example of a trio configuration with a little trio would be a residential roofing antenna secured by three evenly distributed guy wires. Some guy's wires are the structures so high that the aircraft safety signs must be connected to ensure their visibility. Another common use is on a sailboat,Where the rope is used to control the end of the spar or pole of the spinnaker. Depending on the ship, one or more guys may need to be stable.

Anties washcloths are the most common structures that regularly use guy wires for stability. The material used for the guy's conductor is important when the antenna is mast, because metal or other highly conductive fabric and the length of the guy's conductor can significantly affect the radiation patterns. They can also prevent signals on the ground if they are in close proximity to the site.

In order to avoid interference, porcelain insulators were used in the past as dividers on the guy's conductor if it should be used in conjunction with the antenna on the mast. Insulators have prevented the development of large static pockets of electricity that Could cause dangerous discharges. Attentive maintenance of these insulators was essential to avoid the collapse of the mast.

In recent years, many mast antennasIt produces with already installed insulators and grounded with coils on the ground. This prevents the guy's conductor to disrupt the radiation. It also facilitates and safer maintenance of the structure.

alternative to steel wire guy commonly used on antennas with mast is a conductor of non -conductive polymers or plastic. This option relieves the interference caused by the wires of the steel guy. In most cases, however, this is not a popular choice, as polymers resist the weather very well and must be replaced regularly.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?