What did the log see them?
The Log Hall is a saw that is produced or used to cut by protocols. The saw is a tool consisting of a wire or blade with an serrated edge that can cut softer fabrics. In almost all cases, the log saw will be made of metal due to its durability and the ability to remain sharp. The saws come in many different shapes and sizes; They can be large enough to require two people to run or be small and motorized. The manual autopsy of logs has been widely used in the early logging industry, although modern logging usually uses a motorized or even computer device. Brass can be used for cheap saws and is rarely used for serious and intensive work. Steel is more often used because of its price and relative strength. Steel easily meets the needs of most users, although some prefer to spend less money and others need a more resistant EVTIP. Diamond can be combined with metal to form a particularly durable saw blade, although they are usually used for cutting materials such as concrete and stone, rather than wood.
Based on hand, you can start the tree or cut the tree on the boards on the boards. The same logical saw is usually not used for every task. It is common for an individual to use a log saw to fall for a tree, because the motorized nature of the saw makes the task relatively fast. It also saves the worker from the energy needed to fall the tree with an ax or a non -motorized saw. Such manual means were the norm in the first years of the mining sector, although they were widely replaced in modern times.
After the tree has been felled and its branches have been removed, it is often sent to a saw where some form of log saw to cut it into usable boards. On Asawmill, protocols are cut to suitable sizes, excess wood is removed and the finished boards are ready for transport to their other DEstination. Suddenly, many hard manual work entered this process because men manually saw protocols on the appropriate shapes and size. Modern saws, however, are largely automated and require small human leadership.