What is a macerator pump?
Many ships and recreational vehicles (RVS) are equipped with macerator pumps that are essentially compact, electrically driven waste elimination systems. Macer pump crushes solid toilet waste for small particles for easier discharge either overboard in the case of marine applications or in holding tanks on RV. With minimal use of space, maceration pumps are ideal for often small and cramped interiors common to ships, campers and even smaller houses or cottages. Using flushing water, macerator pump or simply maceer, it combines water with suction, mowing and pumping rapidly rotating sanding wheels for grinding, and then the release of the EFROVI. The impeller is often made of bronze because it will not be rust and is robust and easier to produce.
The definition of dictionary is produced or reduced through the liquid in the liquid. TPPRO will combine the macerator pumpIt soak with the grinding or cutting process to significantly reduce solid waste on small and soft particles for comfortable and sanitary discharge. The waste is sucked and through grinding from larger lines or hoses, usually 1.5 inches (38 mm) or 2 inches (51 mm), necessary to allow the passage of solid waste. The resulting steam is then pushed into 1 inch (25 mm) line and pushed from the pump into the correct containers. Installing the macerator on the entrance side of the toilet means that the pump will require less water, a significant factor in the RV configurations, especially those with a single small retention tank.
Macerian pumps should not be confused with marine hygiene devices such as I and II (MSD), which use electrolytic decontamination (type I) and chemical reaction (type II) to eliminate or decontamine waste. All such systems and devices may be subject to different regulations.
Therefore12 V DC current from automotive battery. The average user is relatively easy to install and replace and replace and replace it quite easily. Simple tools such as a pair of pliers, screwdriver, cutters and strippers will do work.
Input lines, those that bring solid waste to the macerator pump must be rigid pipes such as PVC or reinforced wires, flexible hoses. These lines must be able to resist sucking a macerator pump without breaking or collapse. The output lines because they manipulate macerated waste from forced picking, do not necessarily have to be rigid or reinforced. All wastewater lines to AZ pump AZ Macerator pumps, as well as fittings and connections, should often be checked in terms of leakage and wear.