What is a Mini Lathe?
Small lathes are mainly used for machining various turning surfaces and end faces of turning bodies. Such as turning inner and outer cylindrical surfaces, conical surfaces, ring grooves and forming turning surfaces, turning end faces and various commonly used threads, equipped with technological equipment can also process various special surfaces. Drilling, reaming, reaming, knurling, etc. can also be performed on a lathe.
Small lathe
Small lathes are mainly used for machining various turning surfaces and end faces of turning bodies. Such as turning inner and outer cylindrical surfaces, conical surfaces, ring grooves and forming turning surfaces, turning end faces and various commonly used threads, equipped with technological equipment can also process various special surfaces. Can do it on a lathe
Machinable
| Model: CJ9518 / 200 | C2 / 200 / 220V | |
| Technical Parameters: | | |
| Spindle accuracy | 0.01-0.02mm | |
| Maximum turning diameter of workpiece on the bed | 180mm | |
| Workpiece length | 200mm | |
| Rotation diameter | 110mm | |
| Spindle through hole diameter | 20mm | |
| Spindle taper | Mohs 3 | |
| Tail shaft hole taper | Mohs 2 | |
| Spindle speed range (stepless speed regulation) | Low speed -100-1100 rpm ± 10% | |
| Spindle speed range (stepless speed regulation) | High speed -100-2500 rpm ± 10% | |
| Horizontal stroke of carriage | 65mm | |
| Machinable thread range | Metric 0.4-2.0mm (10 specifications) | |
| Machinable thread range | Imperial 12-52TPI (8 specifications) | |
| Voltage frequency | 200-230V / 50HZ | |
| Motor output power | 250W | |
| Lathe dimensions (length x width x height) | 620x300x290mm | |
| Net weight / Gross weight | 38 / 45kg | |
| Packaging size (length x width x height) | 670x330x330mm | |
| Lathe features: | | |
| Safety switch | With overload protection | |
| Stepless speed change | Complete set of metal exchange gears | |
| Four-position knife holder | | |
Serial number | Random attachments: | See the packing list specifically | Quantity |
1 | 80 mm three-jaw chuck | 80mm | 1 |
2 | Stay top | Mohs 2 | 1 |
3 | Exchange gear kit | | 1 |
4 | Allen wrench | | 1 |
5 | Oiler | | 1 |
6 | screwdriver | | 1 |
7 | Double-ended wrench | 5.5 * 7 | 1 |
8 | fuse | 2A | 1 |
9 | user's manual | Chinese | 1 |
