What is the miter joint?

The joint

joint is a type of joint where two objects are joined on the edge, often an angle of about 90 degrees. Two pieces of material that are joined are usually cut at 45 degrees, so when they connect, they form an angle of 90 degrees. Most of the room joints are perpendicular, but there are certain circumstances under which other measurements are used. Miter joints are most commonly used in frames of images or crowns and are even used for compact pipes found in the organ with pipes.

Sometimes the room joint is not perfectly perpendicular. Instead, they require some special circumstances for different angles, such as installing the lining in the house or creating a strangely shaped picture frame or box. Regardless of the application, there must be angles at which the material is cut precisely. Exact and well -calculated measurements will allow these two connected pieces to flush each other, allowing strong and tight room joints. The angle to the WHICH to be solved is located by the distribution of the desired angle afterscythe in half.

The

Miter joints do not become solely of wood, nor the materials used are always flat. The three -dimensional room joints can be found in many places, usually the form of the pipeline. The curves and bends of the pipeline in the plumbing application are usually formed by pipeline bonds, but other pipe types use killed joints. On the organ pipes, pipes - often known as smoke smoke or reeds - can achieve incredible lengths, with some larger organs having long tubes up to 64 feet (19.5 m). The size of such a pipe is often too large for most churches or concert halls, so a room joint can be used to reduce the pipe size.

Another type of miter joint is known as a compound joint. The completed boundary made with a room joint is often a perfect furniture or rectangular, for example in the image frame. Folded room jointsThey are different because they have a different number of sides and angles than you would find on a box or frame. For this reason, cutting of angles must be calculated specifically according to the number of pages used.

Adding force to the distribution joints is very important because they are usually relatively weak without re -enforcing. In order to help re -extend the plate joint, a number of methods can be used. These methods include things such as placing a block to the joint or adding spline and fishing keys. For the joints of wood, it is known that the joint for locking is relatively strong and successful. This type of joint is created using a router where both pieces are connected together through cut cuts.