What is the color gauge?

Color meter is a device that is used to measure the depth of borehole. These devices are most often observed in use in the automotive industry, where they are a useful tool for detail and refine. They can also be used to check the quality of the car production equipment, in order to confirm that the work on painting meets the standards set by the manufacturer. Many companies produce color meters that can be found for sale through catalogs that supply car professionals. This can be useful in checking irregularities or areas of interest and it is also very important when the vehicle is preparing for extensive details. It is concerned that it is possible to remove a clear coat that is applied to small work after laying a pigmented color, and if this coat is removed, it can eat into the basic pigmented color and a costly refining work to fix the error. People can avoid this problem with color measurement.

Clean sheaths are applied in standardized thicknesses by the manufacturer. For the color meter, someone can see how deep the color is, and find out how much of this depth is a clean coat, using this information in detailed description of the vehicle to avoid breaking a clear cut. It is important to be aware of the layers of pure coating and UV protection of the underlying pigment, as it is possible to cause damage without realizing it until it is too late. Measurement measurement can be done before and after details and in various steps along the road to confirm that the color is still in good condition.

There are several ways to work a color meter. Mechanical gauges use a magnet, with measurement determining color thickness based on how much force is needed to remove TON Magnet. These meters only work with rail pads such as steel. Electric meters of color use electric currents as measurement while ultrasonic meterIce, which can be used for glass fiber and plastics, use ultrasound to measure the depth of color.

These devices are carefully calibrated and should be kept in protective cases if they are not used to prevent damage that could distort the width values. It is also advisable to recalibrate regularly, either by compliance with the manufacturer's recommendations or by transporting a breakup for recalibration. This confirms that it measures exactly.