What Is a Pneumatic Saw?
Pneumatic diamond chain saw is composed of imported diamond chain saw head, hydraulic hose assembly and self-pressurized cooling water tank. The hydraulic hose assembly connects the air source and the diamond chain saw. Run and cut. During work, cooling water flows to the cutting site through the hole in the middle of the chain plate, which plays the role of cooling and dust reduction.
Pneumatic chain saw
Right!
- pneumatic
- Pneumatic diamond chain saw can be used for rock and mine mining, for masonry of closed walls, and for concrete and rock demolition during rescue.
- The air source required for a pneumatic diamond chain saw can be a ventilation duct or an air compressor (the chain saw accepts a pressure of 5-7 kg).
- Cutting rocks, concrete, reinforced concrete, pipes, masonry, stones and other stones;
- Slots for masonry of closed walls;
- Applicable places: ground safety places such as slotting, dismantling and cutting of confined walls.
- The only pneumatic diamond chain saw;
- The cutting speed is fast, the speed reaches 6000 r / min;
- Compared with the hydraulic chain saw, it can be operated at a distance of up to 200 meters, and the hydraulic oil pipe connected by the hydraulic chain saw cannot exceed 20 meters;
- Because it is a low-pressure drive (air source pressure is less than 7 kg), compared to hydraulic chain saws, there are no problems such as oil leakage;
- Lightweight and easy to operate by one person.
- The composition of the model and its significance
- 10/6000 Weight of chain saw (kg) / Rated spindle speed (r / min)
- L The first feature: L-diamond chain
- JQ Product category code: Pneumatic saw
- Diamond chain saw head
- It is mainly composed of host, chain plate, diamond saw blade, walking guide, switch, cooling water pipe interface, air pipe interface, etc.
- * Rated spindle speed: 6000 r / min
- * Machine weight (excluding hydraulic hose assembly): 10 kg
- * Power source: compressed air
- * Cutting performance S The cutting cross-section area is 200mm × 100mm, the length is 500mm, and the strength is C40. The cutting time should not be longer than 40s.
- * Maximum length of saw blade cm 43
- * Max.cutting depth cm 40
- Rated pressure: 0.7 MPa
- Rated flow: 1000 L / min
- Washing water pressure: 0.2-0.56 MPa
- Noise: 120 dB (A)
- Applicable rock hardness: 8 F
- Maximum length of connecting trachea: 200 meters
- Device Configuration
- 1 imported diamond saw head
- 1 saw blade
- 20 m trachea
- Self-pressurized cooling water tank
- 2 imported diamond saw blades for rock cutting
- Cutting 2 imported diamond saw blades for loose materials
- 1 special equipment box
- 1 imported diamond saw head
- 1 saw blade
- 20 m trachea
- Self-pressurized cooling water tank
- 2 imported diamond saw blades for rock cutting
- Cutting 2 imported diamond saw blades for loose materials
- 1 special equipment box