What is a direct spoon?

Laying Trowel is a mason tool used to fill and shape the mortar between bricks, which is a process known as direction. It has a triangular blade of about five inches (12.7 cm) to length, connected to a handle made of plastic or wood. Located spatulas can also be used to repair the old mortar and are important tools in archaeological excavations.

Better quality directional folds are made of a single piece of steel, unlike cheaper versions, where the blade and the stem can only connect together. Trowel made of one piece is likely to be stronger. This force comes from the spine or thong from a spatula that extends from the handle to the tip of the blade, and is weakened if it contains a joint. Although the spoons are similar to the Trewel Stress Striglayer Side for Spreal Montar and Sheal Moft Chicks, it is smaller in size and has a blade about half as long. While the blade of a larger Zentilate spoon has a specially tempered, rounded edge suitable for cutting brickSubstance.

There are different styles of direct spoons, with the most popular versions are London and Philadelphia. The London style blade is quite fine compared to Philadelphia style, which is larger and wider. What is called a tucked spoon has a very narrow blade, approximately the same width as the gap between the bricks, and is used specifically for the re -joints in the masonry after removing the old damaged mortar. All directions should be properly taken care of keeping it clean and providing the light coating of the oil if it is not used.

It is Is is it Is is the masonry of the masonry on a pointing spoon, with all four fingers wrapped around the handle and thumb located at the top. This gives a better balance and control and prevents the thumb to be projected into the mortar, which could happen if the thumb was placed on the blade or shackles of the spatula. In the case of an archaeologist, the Trowel is held with the edge of the blade blade PROti ground to gently scrape thin layers of dirt from the inside of the ditch.