What is the screw driver?
The screw drive is a mechanical device that converts the rotary movement of an electrical, pneumatic or hydraulic motor into a linear output movement. This is achieved by transmitting the engine to the round strip threads the coarse thread type of the lead screw screw. The rod passes through a similarly closed movable collar that moves up and down the pole when it turns in both directions. The pin is connected to the control arm that converts the collar movement to the secondary mechanism such as the door or the valve. The screw driver is one of the most effective, simplest and cost -effective mechanical controls, with its only real disadvantage is the limited torque output compared to the hydraulic types of ram.
Lead screws are a commonly used method of converting the rotary input movement to linear or direct line, output movement. A good example of this concept at work is the bench found on the work of most enthusiasts do-it-yourself. When ViceprEithher's ezident direction, vice -presidential jaws open or close. The basic principle that supports this functionality can also be seen when the nut turns to the screw. When the matrix turns, it progresses along the threads of the screw shaft until it pulls tight.
lead screws in more and screw drivers work in exactly the same way, but have a different type of thread located on the screw. These fibers are generally a coarser, square profile, allowing a nut or controlled item to move faster and supply a stronger motif power. Square fibers are also more robust and less susceptible to striing at intensive load. In addition, the basic principle of movement transmission remains the same.
Thelead screws used in the screw control are generally machined on closer tolerances than those used for more, which creates a more predictable and smoother output action. A moving collar thatThe flushing and down on the screw shaft is attached to the control of the controller, which in turn is connected to the mechanism to work. The lead screw is rotated by an electric, pneumatic or hydraulic motor and, as is the case, the collar moves the arm arm and activates the secondary mechanism. In order to reverse the direction of the controlled stroke, the engine is simply perverted. The screw drive is very efficient, accurate and robust, although it is generally not as strong as examples of hydraulic piston type.