What Is a Septic System Pump?

The body of the vacuum suction truck first adopts a spin-drying system and high-pressure automated sewage. The pumped sewage is dehydrated to achieve solid-liquid separation. Vacuum manure suction truck is mainly used in special vehicles for cleaning and cleaning in septic tanks, sewage ditches and sewers. It is a new type of sanitation vehicle that collects, transfers, and cleans up sludge, sewage, feces, and avoids secondary pollution. , Sweeper, and called the three major sanitation models.

Vacuum suction truck

Vacuum manure suction truck is mainly used in special vehicles for cleaning and cleaning in septic tanks, sewage ditches and sewers. It is a new type of sanitation vehicle that collects, transfers, and cleans up sludge, sewage, feces, and avoids secondary pollution. Car, sweeper, and called the three major sanitation models. Its application fields involve domestic sewage treatment, industrial sewage treatment, sewage treatment in aquaculture and so on. This innovative mechanical equipment processing technology with its simple and reliable process, low investment and operating costs, and its many advantages such as high efficiency, environmental protection, energy saving, will create a new way for the reuse of urban sewage in the world today.

Vacuum manure suction processing mode and internal system

First, the body of the vacuum manure suction truck first adopts a spin-drying system and high-pressure automated sewage, which dehydrates the pumped sewage to achieve solid-liquid separation. Chemical methods are used to precipitate dissolved pollutants from the true solution state to form colloidal particles or micro-suspended particles with a solid-phase interface; use efficient and economical adsorbents to separate organic pollutants and chromaticity from sewage Out; then use the filtration system to rely on the principle of fluid mechanics to quickly separate pollutants from water in the septic tank sewage hardening treatment system on the suction truck; after filtering through the filtration system in the tank, the level of third-level treatment is reached, The effluent is reused; the sludge is highly concentrated in the concentration chamber and is regularly discharged by the compression system. Because the sludge has a low moisture content and good dewatering performance, it can be directly treated as domestic waste, eliminating secondary pollution. The treated sewage has no pollution to the municipal pipe network, rivers, and meets the national sewage discharge standards. The equipment uses three-phase power as the main power, and is equipped with an autonomous generator set to solve the situation without three-phase power.

Vacuum pump for vacuum manure suction truck

How many cubic meters per hour the vacuum pump of the vacuum suction truck

The machine processes 16 cubic meters per hour

The maximum pumping speed of the vacuum pump is 3.83 (m3 / min) and the maximum negative pressure is 12

A full can can be pumped in three minutes. This value is difficult to achieve in practice. The vacuum is within 2-3 pressures, within 20 to 30 meters on the ground; the vacuum is within 4-5 pressures, and within 40 to 50 meters on the ground, 15 meters vertically, and the operation is skilled. 7, please pay attention to the pressure relief of the lifting pipe to avoid excessive pressure and excessive swinging of the suction pipe to hurt people.

Main factors affecting the speed of septic tanks

a The actual pumping speed and pressure during the operation of the vacuum pump of the vacuum suction truck, and the degree of sealing of the suction pipe connector.

b The concentration of the septic tank; (The water content is naturally fast. If the septic tank is originally dry, people can stand on it, it will be very slow. It is best to add an appropriate amount of water.

The third-stage water of the pool is pumped into the tank, and the tank sewage pump is pressurized and injected into the septic tank, and diluted to speed up the extraction speed).

c Technical skills and diligence of construction personnel

3.High-pressure pump for vacuum manure suction truck

Mainly hardening and drying machine garbage, sludge, septic, potion dilution, and pipeline cleaning.

(Frequently check whether the screen of the base of the high pressure pump is blocked. If it is blocked, it must be cleaned before working to avoid being burnt.)

4.Pressure water quality separator for vacuum manure suction truck

If the water separator of the vacuum suction truck has accumulated water or garbage, it is an operating error and must be cleaned, otherwise the life of the vacuum pump will be affected, and the vacuum pump will be damaged immediately if it is serious.

V. Vacuum Manure Filter Press

Filter press and powerful counter-roller belt filter press are based on the research, digestion, and absorption of similar products at home and abroad. Based on the common problems of this type of products and the characteristics and requirements of domestic sludge dehydration, The new high-efficiency, continuous operation pressure solid-liquid separation equipment designed and manufactured with today's advanced level can be widely used in sludge (slag) mechanical dehydration.

It has the advantages of continuous production, stable performance, low maintenance rate, strong corrosion resistance, low energy consumption and drug consumption, large processing capacity, low moisture content of filter cake, easy operation, easy maintenance, and easy cleaning. It is a practical solution to the practical problems of dehydration treatment of industrial sludge, domestic sludge and slag. Therefore, it is an ideal equipment for resource recovery and environmental treatment.

Operating procedures, standards and precautions of vacuum suction truck

1. Open the cover of the septic tank with an iron hook, and then use a long bamboo rod (8m) to disperse the clumps of debris in the septic tank.

2. Drive the vacuum suction truck to the work site, put the suction hose (5m long, 3 prepared) into the septic tank.

3. Start the switch of the vacuum suction truck and suck out the faeces until the septic cake in the septic tank is completely sucked, so as to prevent the work site and the pedestrian's clothing from being soiled.

4. Cover the septic tank well and rinse the work site and all tools with clean water.

Fifth, clean up once a year, 90% of the first-level tank cleared, 75% of the second-level tank cleared, all the hard surface of the third-level tank cleared and transported. ?

6. After cleaning, visually observe that there is no deposit floating in the well, and the entrance and exit are unblocked to keep the sewage from overflowing the ground.

7. 10-15 minutes after the manhole cover of the septic tank is opened, people do not stand by the pool. It is forbidden to ignite or smoke by the pool to prevent burns caused by biogas.

8. Do not work in the pool to prevent people from being poisoned or sinking into the water.

9. Workers cannot leave the site after the septic tank well cover is opened. After cleaning, cover the well cover to prevent pedestrians from falling into the well.

Environmental protection-it will not pollute the municipal pipe network, rivers and no pollution after the treated sewage, and meet the national sewage discharge standard. The smell is especially favored by high-end hotels and high-end communities. The noise is small. Even if it is constructed at night, it will not seriously affect the residents' rest.

Efficient-great suction, can go straight down 20 meters. It will not be transported back and forth, eliminating the trouble of not being able to find a sewage discharge place, and also saving a lot of time (while reducing the burden of being caught and fined for confiscation of random emissions).

Energy saving-local emissions reduce the fuel consumption of automobile transportation. The cost of electricity is cheaper than the unit price of a car without oil. Even electricity is cost-effective.

The operation is clean, the cost is low, the profit is large, and the benefit is good.

Sustainable-The equipment cleans the septic tank. After the machine treatment, the water, feces, garbage, and the three parties are separated and dried. The water can be reused, and the feces can be directly used as fertilizer without further processing.

Vehicles roll over or even fall off cliffs, which are often seen. So, in the event of a rollover, what can you do to reduce risks or minimize losses?

The editor below tells you how to respond to a rollover situation.

1) There are usually warning signs before the rollover. If the car rolls sharply during a sharp turn, the body will float to the outside before turning over. When the car is tilted vertically, the car will lean forward or lean back, and the driver will sink or tail The feeling of tilting. When turning over the car, the body slowly tilts, and then completely overturns. As a driver, you should have self-protection awareness and measures to minimize losses.

2) Rollover is often caused by sideslip, understeer or excessive steering. When the driver feels that the vehicle is inevitably overturning, he must stay calm and turn off the ignition switch to the end of the turn to make the steering wheel. Locked to hold the steering wheel tightly. At the same time, hook your feet on the pedal or against the bottom, so that your body is fixed to roll over with the vehicle body to avoid injury when the body hits iron objects while rolling in the cab.

3) If the vehicle rolls into a deep ditch, the driver should quickly lie down under the seat, holding his body between the seat cushion and the shift lever to avoid rolling injuries in the cab, while holding the steering wheel or pedals.

4) If the cab is open, hold the steering wheel tightly when you foresee that you want to roll over, and pull your body down as far as possible, while avoiding throwing your body out of the car when you roll over. If you foresee that you are unavoidable to be thrown out of the car, you should slam your legs at the moment of being thrown to increase the force thrown outwards. When landing, hold your hands and run or roll in the direction of inertial force. A certain distance to alleviate the collision when landing, while paying attention to avoid the rolling car body.

5) Unless the vehicle is about to rush out of the cliff, there will be no doubt that it will be dead while staying on the vehicle, otherwise don't just jump off the speeding vehicle. When you have to jump, you must make the necessary preparations before you jump, unfasten your seat belt, open the door, your head is close to your chest, your feet and knees are tight, and your hands are close to your chest. The waist is bent, and it just rolls out of the car.

You can roll along the trend, don't stand on the ground, don't jump in the direction of the rollover, but jump in the opposite direction of the vehicle's running direction or the reverse direction, or jump to the side of the running and flipping direction, and pay attention to the landing Self-protection

6) After the vehicle rolls over or rolls over, you should pay attention to prevent the fuel from spilling out and catch fire, and then try to straighten the body. If the vehicle rolls over the road or the edge of the cliff, you need to determine whether the vehicle will continue to roll down. In a clear-cut situation, order in the car should be maintained and 'let the people near the cliff go down first and leave from the outside in order.