What is the drawer screw?
A bolt or bolt or bolt Allen, as is otherwise known, is the type of fastening element that uses a hexagonal key often referred to as Allen key or allen key to tightening and removing. This fastening element is used in countless applications where a strong screw or screw is required. It requires less space than a conventional hexagon nut and a screw that requires the joining element to place the joining element, the socket screw is often operated in the applications of tight tolerance, where there is a premium space. SCRET, often used in the construction of machines, high -performance applications and aircraft, is a socket screw of a very high -strength mounting element, which is commonly produced from the highest steel and hardened aluminum to ensure that high -quality fasteners are also created for any application and from many other types and many other type agreed types. MANU also use stainless steel, aluminum and titanifact to the drawer screw. SCRET SCRET, KTErý is renowned for a very high point of release of the fastening element and is able to use in extreme applications where even the highest level of common fastening element could fail. Usually produced in a very fine fiber configuration, fastening elements are also available in coarse thread versions.
The drink of the fine thread of the fastening element is thus adept into a firm holding, when under the torque, that the locking pads and nuts are rarely used at all times. A straight surface found on the underside of the connector head is such that it applies evenly the load on the entire surface of the screw head without the help of a flat pad. Many examples of the use of the flat washer are based on the type of metal in which the connector is used, while the softer metal requires a surface washer. This is done to prevent the tendency of the drawer screw to Kopat to the superficial basis is secured.
head screw head is smaller than n nut nEBO bolt in comparable size, so it requires less physical space to occupy the fastener. Using the Allen Wrench or Allen Head for installation and removing the fastening agent allows the user to choose from the tool depending on various check -in problems. When it is tightened correctly, the broken sound of the drawer screw is free sound or sound. Snap testifies to a high -quality fastener providing considerable tenure.