What is the tube flow meter?

The tube flow meter measures the flow of the flow of either liquid or gases with a tube or tube. These meters are used in industrial environments to ensure that different devices receive the right amount and pressure of different fluids. There are many different types of flow meters. The most common types will be discussed here.

Using the open channel meter is the most common and simplest way to measure the flow of nonhazard liquids. As liquids pour out from the tube, the distance can be fired into the container to determine the amount of pressure in the tube. These measurements can be used to adjust the pressure of the liquid. However, if there is a liquid that one wants to measure, is in the form of gas, or if exposure to air causes to convert to gas or other element, then these meters are inaccurate and need to use another method. Another form of the flow meter of the tube, the hole plate uses a small disks through the opening of the fluid flow through the tube. This causes accumulation of pressure just before the area in the pipeline where de deska installed. The device measures the pressure here and at a short distance along the board where the fluid pressure is reduced, and uses these two numbers to determine the pressure in the tube.

The use of the hole plate is an accurate form of measurement, but the device itself can cause a slight change in pressure. If mild changes affect the purpose of the measurement, the venturi tube flow meter can provide a more accurate idea of ​​the pressure in the tube without affecting the pressure. These meters do this by creating a narrow space that is not as small as the hole in the opening plate and is longer, so the pressure remains constant. The pressure is measured before this narrow place and at the narrowest point for optimal results.

The

Aprilkin nozzle is similar to the flow rate meter of the Venturi. It is inserted into the tube and measures the pressure from the center of the narrow space and in front of it. However, flow nozzles are not as large or sensitive as Venturi tubes.

Pitot tube is a type of tube flow meterE, which is mainly used to measure gas pressure. It consists of a tube that is located in the pipe where the gas flows. The holes on one side of the tube face the gas flow, while the mountains on the other side in the opposite direction. The difference in pressure from these sets of holes is used to calculate the gas flow speed.

These are only basic pipe flow meters used for scientific and industrial purposes. There are more complex forms. Most of them rely on the principle of creating a small pressure change to determine how strong it is.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?