What Is a Universal Vise?

Bench vice, also known as vice, bench vice. Bench vices are universal fixtures used to hold workpieces. It is installed on the workbench to clamp and process the workpiece stably, and it is an indispensable tool for the fitter workshop. The turntable pliers can be rotated to rotate the workpiece to the proper working position.

Bench vice is an essential tool for fitter
Its structure is composed of pliers body, base, guide nut, lead screw, jaw body and so on. The movable clamp body passes the guide rail with
The specifications of bench vices are expressed by the width of the jaws, including 100mm, 125mm, 150mm and so on. Bench vise is a universal fixture used to hold workpieces. There are two types of fixed and rotary type according to the fixed type. According to the function of the shape: there are two types of anvil and anvil.
The structure and working principle of the rotary bench vice are shown in the figure:
Its specifications are expressed by the width of the jaws. Common specifications are 100mm, 125mm, 150mm, etc.
1. When the bench vise is installed, a part of the jaw of the fixed vise must be outside the edge of the vise.
When the bench vise is installed on the bench, the working surface of the fixed vise body must be at the edge of the bench.
(1) Loose when clamping the workpiece
Bench vise
Tighten the handle only by hand, and do not force it with other tools. (2) When working hard, try to direct the force towards the fixed clamp body. (3) Do not knock on the movable clamp body and smooth surface. (4) Moving surfaces such as screws and nuts should be cleaned and lubricated frequently to prevent rust.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?