What Is Adhesive Caulk?
Jointing adhesive is a special jointing adhesive for anti-leakage of exterior wall finishing materials made of special copolymer emulsion as the base material, adding modifiers, active agents, anti-seepage agents, etc. [1] .
Seam glue
- 1. Waterproof, impervious and strong adhesion;
- 2. Heat resistance, UV resistance, acid and alkali resistance;
- 3. It has a certain elasticity, which can resist the crack caused by the deformation of the seam;
- 4. There will be no bulging, peeling, peeling, cracking, etc. when bonding with the old base surface, and the waterproof is guaranteed;
- 5. Non-toxic, odorless, non-polluting the environment, and environmentally friendly products;
- 6, can be adjusted to various colors, with decorative effects.
- 1.Suitable for caulking of all kinds of decorative bricks and stone indoor and outdoor
- 1. Surface treatment, the new gap should be clean, no loose objects, debris and water. When drying, the gap should be wet treated but there should be no water accumulation. The original seam should be polished to a depth of 1-2mm during maintenance work Shape, remove the floating ash and wash it with water.
- 2. Scientific ingredients: According to seam glue: cement = 1: 5, mix the cement evenly into a putty.
- 3. Joint filling: Use a spatula or grey spoon to press the mixed jointing putty into the joint and compact it diagonally. After the jointing putty has a certain strength (about 4-6H), clean the finish, and pay attention to whether the joint is full, and repair defects such as trachoma, holes, unevenness, and missing fill, etc. Cloth or tile cleaner for further cleaning. After the seam is completed, it should be inspected and cured. Generally, it should be sprayed once after 8H.
- 1. The surface must be flat, solid, clean, free of oil, dirt and other loose animals.
- 2. Obvious voids and trachoma should be blocked with cement mortar, smoothed, and sharp edges should be removed.
- 3. Wet the substrate in advance to prevent water accumulation.
- 4. The freshly poured concrete should have a certain curing time to prevent the concrete from shrinking.
- 5. The old concrete surface must be washed with water first, and then painted.
- 1. Ensure that the product completely covers the base surface during construction, and perform other operations after 24 hours of curing.
- 2. This product is environmentally friendly. It is non-toxic, tasteless and does not pollute the environment. Please use it with confidence.
- It should be stored in a cool and dry place with a storage period of 12 months; it is non-dangerous, non-toxic, tasteless, does not pollute the environment, and can be transported safely.