What is an air separator?

Air separator is a device used to remove water and oil from compressed air. Usually mounted on a wall near the air compressor, the air separator can be a more filter apparatus. The act of compressing air generates a generous amount of heat that leads to condensation and water in the air supply. Often a minute of the amount of oil leaks the past bearings and ends up in the air, creating contamination in the air supply. The use of the air separator filters prevents a drop of oil or water from destroying the paint task or causing rust to form in the air -operated tool. It is made of heated and compressed air cooling. The lower part of most air compressors contains a large amount of water and should be emptied every week. Even if it is equipped with an air separator, the advantages of water emptying from the compressor tank is worth the time needed to do so. Rust can form inside the compressor tank and air separators will not fight this problem. AirThe tank and hose can cause damage to the internal functioning of the air tool. The impact tools are particularly affected by water, while the torque load is seriously affected by water damage.

The effects of water when using air tools can be drastically reduced by installing the air separator into the power line leading from the compressor to the tool. In particular, in particular, damp weather, air tools can actually drip water because they are used if they do not help from the air separator. This dripping water can damage the vital components of the engine if it accidentally allows dripping in the engine compartment.

found in most domestic stores, as well as hardware stores and farm menu, air separators filters can be purchased at minimal costs and installed in minutes. Most filters are repeatedly usable and are able to be emptied as soon as it is full of water.Some oil separators filters are not repeatedly applicable; However, their minimum costs allow them to change without spending a lot of money. It is important that the filters monitor and maintain the operating state, because if they are full of fluids, they will not offer any protection against contaminants.