What is the angle meter?

The measurement angle measures the angle of a fixed or processed object relative to a larger object. The three most common types of angles of meters are used in forestry, wood processing and engineering. Each of these meters does the same basic thing; They just do it in a completely different way. In any case, it has a single object, usually a tree, a blade or fastening element, its angle checked due to a larger piece to which it is attached, such as the ground or work area.

and the angular forester breakup is used to inventory of trees on the land. These supplies show how many trees of certain sizes are in the area. This information is used to find areas suitable for harvesting. Buyers require different sizes and types of trees depending on their business; The use of tree reserves is therefore a good way to monitor growth and diversity within the soil.

In forestry, a wide range of angle styles is used. The oldest style is still used to this day; It looks like an applied piece of metal with an embossed shape in the form of KYear's pyramids. The foresters use this simple device by holding the tool specified from their eyes and lining the tree up into the hole. Forester can tell the approximate size of the tree and its angle with respect to the ground. Newer forms of forest gauges look like prisms, magnifying glasses or small spyglassy.

Woodlands can use angle meters to determine the exact angle at which the blade works. In the past, these meters were complicated and generally used by plumbing lines. Newer woodworking meters are almost always digital and use magnets available directly on the saw blade. Once in place, they can provide a precise reading of the saw in seconds.

In technical, assembly and technical fields, the third type of angle is. These measures are used to maintain a uniform torque load above the non -synchronizing fasteners via part. After the connector is usually bolt, it is firmly screwed, then screwed further to the specified angle. If the workpiece has several fasteners on the same piece, all are attached to the same angle.

Originally, angular meters used for this process were similar to those used in wood processing. To determine the final angle of the fastener, they used mechanical gauges and tensioning rods. Newer angle meters are built directly into the tool used to tighten the fastening element. However, these torque torque keys are generally unusual. For users who need a specific angle but do not have a key angle, it is easy to tighten the screw and then use a simple plastic protractor to tighten to the right angle.