What Is an Antistatic Mat?

Anti-static rubber mat is also called anti-static table mat, anti-static rubber sheet, anti-static rubber, etc. Generally has a two-layer structure, the surface layer is a static dissipative layer, and the bottom layer is a conductive layer. Surface layer color: green, gray, blue, black, and there are light and matt points. Base color: black. Performance: Antistatic rubber pads are mainly made by a variety of processes using static conductive materials, static dissipative materials and synthetic rubber. Long-lasting use, good acid, alkali and chemical flux resistance, wear resistance and easy cleaning.

Anti-static rubber pad

Anti-static rubber mat is also called anti-static table mat, anti-static rubber sheet, anti-static rubber, etc. Generally has a two-layer structure, the surface layer is a static dissipative layer, and the bottom layer is a conductive layer. Surface layer color: green, gray, blue, black, and there are light and matt points. Base color: black. Performance: Antistatic rubber pads are mainly made by a variety of processes using static conductive materials, static dissipative materials and synthetic rubber. Long-lasting use, good acid, alkali and chemical flux resistance, wear resistance and easy cleaning.

Chinese name

Anti-static rubber pad

Surface layer resistance

6-9th power of 10

Bottom resistance

10th to 5th power

Static discharge time

: <0.5s

0.6m * 10m * 2mm, 0.9m * 10m * 2mm, 1.0m * 10m * 2mm, 1.2m * 10m * 2mm (width * length * thickness).

1. Tensile strength: 3.6Mpa

2. Elongation at break: 188%

3. Tear strength (right angle): 20.6KN / m

4. Resilience (sample is laminated by 6 layers of sheet): 14%

5. Impact embrittlement temperature (no cut) -250c: no damage

6. Compression permanent change rate 700Cx22h. Compression 25%: 17.9

7. Temperature resistance: 200 degrees Celsius

Anti-static rubber pads are mainly made of anti-static (conductive) materials and static dissipative synthetic rubber. The surface layer is about 0.5 mm thick dissipative static layer, and the bottom layer is about 1.5 mm thick conductive layer. It is usually a 2mm double-layer composite structure. The table mat has a long service life, has good properties of acid, alkali and chemical resistance, and is wear-resistant and easy to clean. The conductive floor mat is made of high-quality conductive materials such as synthetic rubber.

Electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits and other microelectronics industry production workshops and advanced laboratories are mainly used for laying tabletops, assembly line work surfaces, shelves and making floor mats, etc., and are suitable for different conditions, different Environmental needs.

Dissipate static electricity from the human body, so that the human body and the ESD tweezers, tools, appliances, and meters on the table reach a uniform potential, so that the electrostatic sensitive device (SSD) is not disturbed by the phenomenon of electrostatic discharge, thereby achieving the effect of electrostatic protection. Damaged. This product does not contain S, Hg, NH3 +, Pb and other harmful substances. Softness: soft, strong rebound and toughness. Whether the product is used in the cold north or the warm south, it can maintain its softness and flatness, (it is laid on the ground, the table is very flat and will not be tilted)