What is the concrete of self -confidence?

concrete with its own balancing is a polymer -based mixture used for smoothing or even from a concrete surface. Unlike traditional concrete, the concrete mixture is very thin. This allows the mixture to flow easily as soon as it is applied to the surface relying on gravitational forces to distribute the mixture evenly. When used to overlap or top of the existing floor surface, the concrete can equalize as thin as the sheet of paper or up to several inches thick.

This product can be used both inside and out and basically perform one of two basic functions. First, it can serve as underlying tiles or other floor coverings. In this type of application, concrete with its own equalization is poured onto wood or concrete floors to level it before installing the floor. This product can also be used as an overlap on existing concrete floors or terraces. In this type of application, the mixture is used to hide ugly, cracked or damaged concreteh surfaces.

Before installing products with their own balance, users should thoroughly clean the floor and remove all free concrete and residues. Furthermore, any holes or cracks on the surface should be repaired by concrete epoxy or repair product. The dam must be built around the perimeter of the room or plate to control the flow of liquid because of its own levels. Some projects may also require the floor to be before using the mixture. Finally, concrete can be mixed according to the manufacturer's instructions and poured on the floor.

One of the primary advantages of this product is the speed and ease in which it can be used. Even newcomers installations can effectively revive or at the level of concrete without expensive or complex tools and equipment. By using self -comparing concrete to balance the surface, homeowners or suppliers can extend the life of the completed floor above and reduce the risks of Squeaks or deformation. This material is as strong as conventional concrete at the right instaLaci and will last for many years with minimal maintenance. Finally, this product can be combined with dyes or stains that are distributed, worn concrete floors a new look.

To reduce the risk of moisture -related problems, products for self -comparison should not be applied to wooden floors in the internal stage. Instead, they should only be used for external or humidity products. It is also important to mix this product with the right consistency before application to ensure that their own levels are intended.