What Are Micro Forceps?

High temperature resistant wafer tweezers are also known as precision tweezers, electrostatic conductive tweezers, or PEEK for short, have many significant advantages such as high temperature resistance, wear resistance, chemical resistance, flame resistance, and so on.

High temperature resistant wafer tweezers

Right!

High temperature resistant wafer tweezers

High temperature resistant wafer tweezers

A. The handle is anti-magnetic stainless steel, with different shapes, including 4 claws, 5 claws and 6 claws.

B. Wafer tweezers are specially designed and can safely move wafer silicon wafers to avoid product contamination caused by direct contact with human hands.

C. Symmetry and balance are first-rate, the tail is polished, no scratches / perfect surface.

All high-precision top tweezers are coated with a special coating and feel comfortable.

D. Suitable for semiconductors, photovoltaics, microelectronics, fiber optics and micro optical components.

As a partner of many well-known brands, it

Quality and services to ensure employees' occupational health, a safe environment and a better future!

1. After entering the laboratory, wear gloves before removing tweezers to avoid contamination.

2. Only use clean tweezers to hold the chip. Once the tweezers are dropped on the ground or touched by hands, or contaminated by other reasons, they must be cleaned before reuse.

3. After use, the tweezers should be placed in the specified place of each station, and should not be placed arbitrarily. If there are special process tweezers, they should be kept by themselves after use, and should not be mixed with the tweezers at each station in the laboratory.

4. Hold the tweezers in a "holding pen style" to grab the chip.

5. When picking up the chip, the order should be taken from the back to the front, and when putting back the chip, put it back from the front to the back to avoid scratching the chip surface.

6. When picking up the chip, place the "short side" (saw-shaped head) on the front of the chip, and the "long side" (flat head) on the back of the chip. Do not damage the chip.

7. Never touch tweezers into the acid tank or DI WATER tank.

8. The tweezers can only be used to grab the chip. It is not allowed to be used for other purposes.