Can I install a ceiling fan?

There was a period when it was almost impossible to install the solo of the ceiling fan. One person was obliged to hold the fan while the other connected the cabling from the ceiling. Now the fans are made to support them while these connections are created, which makes it easier to install the ceiling fan, provided the ceiling is in advance. If the support in the ceiling is made of plastic, it was designed only to hold light and have to be replaced by a metal box to support the significant weight of the ceiling fan. Metal intersections are evaluated to hold £ 35 (15.87 kg). If the fan weighs more, its support bracket will have to be connected to the ceiling beam or beam. Before you touch any connection in the ceiling, be sure to turn off the circuit breaker E circuits that send energy to this place. Working with live wires can lead to electric shock and serious injury.

If the ceiling was pre -connected for a ceiling fan, there should be four wires. Green wire for ground, black for fan power, red or blue for light power and conventional white wire. If the wires are not connected to the accessories, the ends should be sealed with an electric tape or limited by plastic terminators to avoid mutual contact.

assuming that the ceiling fan is new, will need assembly. Open the box, expand and spread out parts in an organized way to make this work easier. Before installing the ceiling fan, read the instructions all the way. Meet the parts. This will help prevent incorrect assembly that may require backward tracking and extra time.

Initial step towards installing a ceiling fan usually requires attaching a support bracket (which is supplied with a fan) to the existing ceiling bracket. The support console allows you to hang the fan while connecting. SomeEré support consoles provide an open insert for the assembly and engine assembly. Others use a heavy wire hanger that extends from the top down and attaches to the metal console built into the ceiling plate.

with the power off and a partially assembled ceiling fan hanging from the support bracket can now be connected by cabling. Ideally, the ceiling wires will be labeled in color to match the ceiling fan conductors. If the ceiling wires are differently colored, ask an electrician, if you have any doubts about how to connect them correctly.

Once the wires are connected, the fan can be lifted to the location and the top canopy is raised and screwed to the edge of the ceiling support base. From there the blades or paddles are connected by screws. It is often part of the light set, but sometimes you sell it separately. If you do not require light, the fan wire cabinets are limited by decorative under the pelvis.

If you prefer to add a light set when installing strThe optic fan is often assembled and requires only the connection of the cable harness and housing. Many of them use Candelabra style bulbs with small bases, so don't forget to get the right type and power. The glass bowl is suitable under it, commonly with a decorative button that screws on the stem of the light bar. When the task is complete, turn on the power supply and make sure that the tensile chains are in the "turned on" position for testing the fan and light.

You will only need a ladder and a few basic tools to install a ceiling fan and it should take about an hour and a half. Fans also come up with a leveling set if needed. This prevents the fan from fluctuations at higher speeds.

If your ceiling is not in advance for the ceiling fan, the electrician can start the necessary cabling and install the metal connecting box in place. It can be more expensive than the fans, but you can enjoy the ceiling fan for the coming years.You can also get your investment back to lower heating and air conditioning over time.